Giới thiệu
Cái PCB Eyelet Press Insertion Machine features a pneumatically assisted press mechanism that delivers stable insertion force across extended production cycles. The press head accommodates multiple eyelet sizes through a quick-change tooling system, allowing rapid switching between eyelet specifications. Each insertion cycle is monitored by a closed-loop force sensor that verifies the eyelet is fully seated and properly flared against the board surface, preventing incomplete insertions that could compromise electrical continuity in through-hole assemblies.
The feeding mechanism utilizes a vibration bowl sorter combined with a linear track delivery system, ensuring a continuous supply of eyelets to the insertion station without interruptions. Board clamping fixtures hold panels firmly during pressing, eliminating movement-induced offset errors. The control system stores insertion profiles for frequently produced board types, reducing setup time for recurring orders. Real-time counters and shift reports provide operators with visibility into output volume, insertion yield, and defect rates, supporting data-driven quality management.
Consistent eyelet seating reduces the risk of connection failures in environments subject to vibration, thermal cycling, and mechanical stress. The automated pressing process minimizes operator-dependent quality variation, making it suitable for manufacturers handling diverse specifications. With a design focused on uptime and low maintenance, the PCB Eyelet Press Insertion Machine supports continuous production without sacrificing insertion accuracy. For manufacturers seeking to improve through-hole assembly throughput, this machine addresses the mechanical challenges of eyelet installation on circuit boards.
PCB Eyelet Press Insertion Machine
How the PCB Eyelet Press Insertion Machine Mounts Rivets on PCB Boards
The rivet-to-PCB insertion cycle begins when a rivet exits the vibratory feed track and drops into the press head collet, which grips the body and aligns it coaxially with the press ram. The PCB is secured by a pneumatic hold-down fixture preventing lateral movement during the downward stroke. The ram engages, pushing the rivet through the pre-drilled aperture at a controlled velocity. Once the rivet head contacts the board surface, the ram continues with increased force to ensure full shank penetration. The lower die captures the rivet tail and forms a controlled flare that expands the barrel beyond the hole dimension, creating a mechanical lock that resists pull-out forces during thermal cycling and vibration.
Press force, ram speed, flare depth, and dwell duration are independently programmable parameters, allowing the machine to be tuned for specific rivet-and-board combinations without mechanical modification. The force monitoring subsystem samples continuously throughout the press stroke, generating a force-versus-displacement signature for each rivet. This data enables the machine to detect partial insertions, missing rivets, and board delamination in real time, segregating affected units before they enter soldering. The multi-rivet magazine supports sequential insertion of different rivet sizes within a single board program without tooling pauses.
The commercial advantage of automating PCB Eyelet Press Insertion Machine with this level of process control is a measurable increase in assembly yield and a decrease in warranty-related field failures. Manual rivet installation introduces force variability that operator training cannot fully eliminate. This PCB Eyelet Press Insertion Machine delivers deterministic insertion outcomes, where each riveted joint is verified by instrumented data rather than visual inspection alone. For facilities running high-mix through-hole assemblies, the PCB Eyelet Press Insertion Machine’s fast setup and programmable force profiles reduce changeover downtime, while sustained insertion accuracy lowers per-unit manufacturing cost across all batch sizes.
Rivet Component
Thông số kỹ thuật
| Người mẫu | YT-7000 |
| Kích thước tổng thể | 2080 mm (Dài) × 1230 mm (Rộng) × 1600 mm (Cao) |
| Cân nặng | 1.000 kg |
| Không khí | 6±0,5 kg/cm² (Lượng khí tiêu thụ: 656 N/phút) |
| Quyền lực | 220 V AC, một pha 50/60 Hz, 1,4 kW |
| Tiếng ồn | 80 dB |
| Operating Environment | 5–40 u |
| Độ ẩm | 10-90%RH (có thể sử dụng miễn là không có hạt tinh thể trong không khí) |
| Các yêu cầu đối với môi trường xung quanh | Không có khí ăn mòn |
| Chiều di chuyển của bàn làm việc | X680mm, Y370mm đa hướng; X580mm, Y370mm hai bên |
| Tốc độ di chuyển của bàn làm việc | 22,5 m/phút |
| Bảng mạch điện tử PCB | 490×350 (tối đa) |
| Tốc độ cắm | 200 chiếc/phút |
| Thời gian lắp đặt bảng mạch điện | 4 giây |
| Thành phần đã được chèn | Đinh tán thông thường 1,6–3,5 mm, đinh tán dài và đinh tán Lacerivet |
| Số lượng phích cắm | 3 đầu |
| Chế độ chỉnh sửa lỗ | Theo hệ thống góc của máy |
| Hệ thống điều khiển máy tính | Hệ điều hành Windows |
| Hệ thống hiển thị | Màn hình LCD màu 17 inch |
| Hệ thống cấp thức ăn | Hệ thống cấp liệu lớn có chức năng rung |
Rivet Component
https://www.youtube.com/@allaismt
For more information about the PCB Eyelet Press Insertion Machine, Vui lòng gửi email đến
Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.
