소개
그만큼 Radial Insertion Feeder is purpose-built to supply radial lead capacitors into pick-and-place machines for automatic insertion onto PCBs. Unlike surface-mount components, radial-leaded parts present two leads exiting the base of a cylindrical body, requiring the feeder to orient each part consistently before handoff to the insertion head. The unit handles singulation, alignment, and presentation in a continuous cycle, keeping the insertion head supplied without operator intervention.
Compatible with both SMT and THT assembly lines, the feeder integrates as a standard peripheral on the host pick-and-place platform. Tooling cassettes swap quickly between capacitor sizes, ESD-safe material paths remain continuous through the supply reel to the pickup nest, and the feeder’s controller communicates directly with the inserter via standard handshaking. Multi-track configurations support higher placement rates when paired with high-speed insertion machines.
In operation, misfeed rates trend low and attended changeovers are minimal. The feeder runs from a supply reel of loose or tray-packed radial capacitors, so replenishment is straightforward, and recipe changes are handled at the controller rather than at the bench. Each recipe stores pitch, lead diameter, and pickup timing, recalled automatically when a new part is queued.Across the PCB assembly equipment fleet, the radial insertion machine lowers per-unit insertion cost while raising equipment uptime.
Radial Insertion Feeder
Radial Insertion Feeder: Assembly Process Automation
In a smart home electronics factory, the Radial Insertion Feeder runs as an automated supply loop on the host pick-and-place machine, feeding radial-leaded capacitors from a supply reel directly to the insertion head. Each capacitor is singulated, vision-checked for orientation, and presented at the pickup nest before the inserter’s next request pulse arrives. The feeder runs unattended during normal production, with operators intervening only at scheduled reel replenishment or during fault recovery.
Recipe handling at the feeder controller allows product changeovers to occur in software. When a new board enters the line, the feeder pulls the matching capacitor recipe — pitch, lead diameter, pickup timing — from local memory and applies it without operator keyboard input at the bench. Tool cassettes swap between capacitor sizes in under two minutes, and ESD-safe material paths run continuously from reel to pickup nest, keeping dielectric-sensitive parts isolated through the feed cycle.
For the assembly process, the feeder feeds the inserter in a measured cadence that matches host cycle time. SPC dashboards receive placement events, vision rejects, and parts-per-minute in real time, and line engineers tune feed timing parameters in software rather than at the bench. The station feeds components continuously while neighboring SMT stations run in parallel, and the labor footprint at the insertion step is reduced to periodic replenishment and exception handling.
Capacitor
명세서
| 모델 | YN-R2203 | YN-R2201 | 비고 |
| 치수 (길이×너비×높이) | 740×47×144(110)mm | 750×68×144(110)mm | 바닥에서 픽업까지의 높이: 110mm 최대 높이(바닥부터 손잡이까지): 144mm |
| 무게 | 6kg | 8kg | |
| Operating Voltage | DC 24V | DC 24V | |
| 공기 공급 필요 | 없음 | 없음 | |
| 최대 전류 | 3A | 3A | |
| Feed Speed | 0.6–2초/개 | 0.6–2초/개 | |
| 구동 방식 | 순수 전기차 | 순수 전기차 | |
| 조작 패널 | 0.96인치 TFT 컬러 디스플레이 화면 해상도: 80×160 픽셀 |
0.96인치 TFT 컬러 디스플레이 화면 해상도: 80×160 픽셀 |
|
| 재료 절단 피치 오차 | ±0.2mm | ±0.2mm | |
| 적용 가능한 테이프 간격 | 12.7mm/15mm | 12.7mm/15mm | 필요한 교체 부품 |
| 테이프 절단 기능 | 선택 사항 | 선택 사항 | YN-R2203: 커터 포함 YN-R2201: 커터 미포함 |
| 굽힘 기능 | 선택 사항 | 선택 사항 | 재질에 따라 굽힘 가공을 맞춤 설정할 수 있습니다. |
| 커터의 수명 | 100만 회 이상 | 100만 회 이상 |
Capacitor
https://www.youtube.com/@allaismt
For more information about the Radial Insertion Feeder, 자세한 내용은 이메일을 보내주세요.
문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.
