Introdução
O Radial Insertion Feeder is purpose-built to supply radial lead capacitors into pick-and-place machines for automatic insertion onto PCBs. Unlike surface-mount components, radial-leaded parts present two leads exiting the base of a cylindrical body, requiring the feeder to orient each part consistently before handoff to the insertion head. The unit handles singulation, alignment, and presentation in a continuous cycle, keeping the insertion head supplied without operator intervention.
Compatible with both SMT and THT assembly lines, the feeder integrates as a standard peripheral on the host pick-and-place platform. Tooling cassettes swap quickly between capacitor sizes, ESD-safe material paths remain continuous through the supply reel to the pickup nest, and the feeder’s controller communicates directly with the inserter via standard handshaking. Multi-track configurations support higher placement rates when paired with high-speed insertion machines.
In operation, misfeed rates trend low and attended changeovers are minimal. The feeder runs from a supply reel of loose or tray-packed radial capacitors, so replenishment is straightforward, and recipe changes are handled at the controller rather than at the bench. Each recipe stores pitch, lead diameter, and pickup timing, recalled automatically when a new part is queued.Across the PCB assembly equipment fleet, the radial insertion machine lowers per-unit insertion cost while raising equipment uptime.
Radial Insertion Feeder
Radial Insertion Feeder: Assembly Process Automation
In a smart home electronics factory, the Radial Insertion Feeder runs as an automated supply loop on the host pick-and-place machine, feeding radial-leaded capacitors from a supply reel directly to the insertion head. Each capacitor is singulated, vision-checked for orientation, and presented at the pickup nest before the inserter’s next request pulse arrives. The feeder runs unattended during normal production, with operators intervening only at scheduled reel replenishment or during fault recovery.
Recipe handling at the feeder controller allows product changeovers to occur in software. When a new board enters the line, the feeder pulls the matching capacitor recipe — pitch, lead diameter, pickup timing — from local memory and applies it without operator keyboard input at the bench. Tool cassettes swap between capacitor sizes in under two minutes, and ESD-safe material paths run continuously from reel to pickup nest, keeping dielectric-sensitive parts isolated through the feed cycle.
For the assembly process, the feeder feeds the inserter in a measured cadence that matches host cycle time. SPC dashboards receive placement events, vision rejects, and parts-per-minute in real time, and line engineers tune feed timing parameters in software rather than at the bench. The station feeds components continuously while neighboring SMT stations run in parallel, and the labor footprint at the insertion step is reduced to periodic replenishment and exception handling.
Capacitor
Especificações
| Modelo | YN-R2203 | YN-R2201 | Observações |
| Dimensões (C × L × A) | 740 × 47 × 144 (110) mm | 750 × 68 × 144 (110) mm | Altura da captação inferior: 110 mm Altura máxima (da base até a alça): 144 mm |
| Peso | 6 kg | 8 kg | |
| Operating Voltage | DC 24V | DC 24V | |
| Abastecimento de ar necessário | None | None | |
| Corrente máxima | 3A | 3A | |
| Feed Speed | 0,6–2 s/unidade | 0,6–2 s/unidade | |
| Método de acionamento | Totalmente elétrico | Totalmente elétrico | |
| Painel de operação | TFT colorido de 0,96″ Resolução da tela: 80×160 pixels |
TFT colorido de 0,96″ Resolução da tela: 80×160 pixels |
|
| Erro no passo de corte do material | ±0,2 mm | ±0,2 mm | |
| Espaçamento aplicável entre as fitas | 12,7 mm/15 mm | 12,7 mm/15 mm | Peças de reposição necessárias |
| Função de corte de fita | Opcional | Opcional | YN-R2203: Com cortador YN-R2201: Sem cortador |
| Função de flexão | Opcional | Opcional | A dobra pode ser personalizada de acordo com o tipo de material |
| Vida útil da lâmina | ≥1 milhão de vezes | ≥1 milhão de vezes |
Capacitor
https://www.youtube.com/@allaismt
For more information about the Radial Insertion Feeder, Por favor, envie um e-mail para
Responderemos à sua solicitação prontamente e forneceremos informações detalhadas sobre nossos produtos e serviços.
