Giới thiệu
Cái Large-size Tin Sheet Cutting Feeder operates on a sequential logic that pairs incremental material handling with deterministic cutting action. As the tin sheet enters the machine, a set of anti-slip feed rollers grips the surface and advances the material under servo control. A linear encoder reports real-time position to the PLC, which halts the feed precisely when the target length is reached. At that moment, the cutting module — a low-inertia blade driven by a dedicated actuator — executes the severance with minimal deformation to the sheet edge.
The process workflow unfolds in four stages: load, set, run, and collect. During the load phase, the operator mounts the sheet or threads the coil and secures it against the backstop. The set phase involves selecting a saved recipe or entering new parameters through the operator panel. In run mode, the feeder cycles continuously, producing cut pieces at the configured cadence. Finally, the collection stage routes finished parts to a stacking tray or output conveyor. The system supports both manual single-cycle trigger and fully automated repeat operation, adapting to batch sizes from prototype quantities to high-volume runs.
Regarding key performance attributes, the machine achieves tight length tolerances across the full sheet width range, thanks to its closed-loop positioning system. Blade replacement is tool-free, allowing rapid changeover between different material thicknesses or when the cutting edge reaches end of life. The control system provides real-time monitoring of feed current, cut force, and cycle count, enabling predictive maintenance scheduling. Designed for industrial floor deployment, the feeder features a robust steel frame, vibration-damping feet, and an electrical cabinet rated for typical factory environments.
Large-size Tin Sheet Cutting Feeder
How Large-size Tin Sheet Cutting Feeder Processes Tin Tape for Smart Appliance Electronics Manufacturing
Modern smart appliance electronics manufacturing facilities rely on continuous material supply to keep pace with high-speed assembly lines. The Large-size Tin Sheet Cutting Feeder processes tin sheet coil stock directly, feeding material from a roll and cutting it to programmed lengths on demand. In plants producing inverter air conditioners and intelligent refrigerators, tin sheet coils serve as the source material for EMI shielding panels and heat sink substrates. Rather than maintaining pre-cut blank inventory or outsourcing to external sheet metal vendors, production teams load a coil onto the feeder’s unwind station and draw precision-cut pieces as needed. This in-house capability compresses the supply chain and substantially reduces material handling overhead.
The workflow integration follows a straightforward pattern. A coil holder with tension control supplies the tin sheet into the feeder’s servo-driven rollers, which advance the material to the exact stop position before each cut executes. Because the feeder stores multiple cutting recipes, switching between different appliance models — transitioning from a compact microwave to a full-size side-by-side refrigerator — requires only a touchscreen recipe selection. Cut lengths and piece counts adjust within seconds, eliminating the retooling delays associated with mechanical die sets. Finished cut pieces exit the machine onto a collection tray or directly onto a conveyor that feeds downstream assembly stations.
From a performance standpoint, the feeder delivers measurable advantages in smart appliance production environments. Dimensional accuracy of each cut piece ensures proper fit during final assembly, reducing rework and part misalignment at downstream robotic placement heads. Consistent blade geometry produces clean sheared edges without burrs, which matters for panels that contact sensitive PCBs inside appliance control modules. Continuous roll processing means fewer material changeovers and reduced scrap between cutting cycles, contributing to improved material utilisation across the production schedule.
Thông số kỹ thuật
| Mục | Thông số kỹ thuật | Mục | Thông số kỹ thuật |
| Phương pháp cho ăn | Pick then cut | Bảng điều khiển hoạt động | 3.5″ TFT color screen, 480×320 pixels, capacitive |
| Component Type | Roll-type material | Tốc độ cấp liệu | Điều khiển tốc độ liên tục, tối đa 100 mm/s |
| Voltage | 24,0 V DC | Standby Power | <20W |
| Hiện tại | TỐI ĐA 5,0A | Operating Temperature | -20~65°C |
| Độ chính xác khi cấp liệu | ±0.2 | Độ ẩm hoạt động | 20~90%RH, không ngưng tụ |
| Điều chỉnh vị trí bộ cấp liệu | X: điều chỉnh giới hạn cơ học; Y: điều chỉnh phần mềm; Z: điều chỉnh cơ khí |
Nhiệt độ bảo quản | -40~85°C |
| Thông số kỹ thuật hệ thống cấp khí | 0,40–0,60 MPa | Độ ẩm trong kho | 10~95% |
| Giao diện truyền thông | Loại GPIO NPN/PNP | Tuổi thọ sử dụng | ≥20.000 giờ (25°C) |
| Giao tiếp phần cứng | GPIO, RS232, TCP/IP | Dimensions | Theo thông số kỹ thuật của sản phẩm |
https://www.youtube.com/@allaismt
For more information about the Large-size Tin Sheet Cutting Feeder, Vui lòng gửi email đến
Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.
