소개
그만큼 Large-size Tin Sheet Cutting Feeder operates on a sequential logic that pairs incremental material handling with deterministic cutting action. As the tin sheet enters the machine, a set of anti-slip feed rollers grips the surface and advances the material under servo control. A linear encoder reports real-time position to the PLC, which halts the feed precisely when the target length is reached. At that moment, the cutting module — a low-inertia blade driven by a dedicated actuator — executes the severance with minimal deformation to the sheet edge.
The process workflow unfolds in four stages: load, set, run, and collect. During the load phase, the operator mounts the sheet or threads the coil and secures it against the backstop. The set phase involves selecting a saved recipe or entering new parameters through the operator panel. In run mode, the feeder cycles continuously, producing cut pieces at the configured cadence. Finally, the collection stage routes finished parts to a stacking tray or output conveyor. The system supports both manual single-cycle trigger and fully automated repeat operation, adapting to batch sizes from prototype quantities to high-volume runs.
Regarding key performance attributes, the machine achieves tight length tolerances across the full sheet width range, thanks to its closed-loop positioning system. Blade replacement is tool-free, allowing rapid changeover between different material thicknesses or when the cutting edge reaches end of life. The control system provides real-time monitoring of feed current, cut force, and cycle count, enabling predictive maintenance scheduling. Designed for industrial floor deployment, the feeder features a robust steel frame, vibration-damping feet, and an electrical cabinet rated for typical factory environments.
Large-size Tin Sheet Cutting Feeder
How Large-size Tin Sheet Cutting Feeder Processes Tin Tape for Smart Appliance Electronics Manufacturing
Modern smart appliance electronics manufacturing facilities rely on continuous material supply to keep pace with high-speed assembly lines. The Large-size Tin Sheet Cutting Feeder processes tin sheet coil stock directly, feeding material from a roll and cutting it to programmed lengths on demand. In plants producing inverter air conditioners and intelligent refrigerators, tin sheet coils serve as the source material for EMI shielding panels and heat sink substrates. Rather than maintaining pre-cut blank inventory or outsourcing to external sheet metal vendors, production teams load a coil onto the feeder’s unwind station and draw precision-cut pieces as needed. This in-house capability compresses the supply chain and substantially reduces material handling overhead.
The workflow integration follows a straightforward pattern. A coil holder with tension control supplies the tin sheet into the feeder’s servo-driven rollers, which advance the material to the exact stop position before each cut executes. Because the feeder stores multiple cutting recipes, switching between different appliance models — transitioning from a compact microwave to a full-size side-by-side refrigerator — requires only a touchscreen recipe selection. Cut lengths and piece counts adjust within seconds, eliminating the retooling delays associated with mechanical die sets. Finished cut pieces exit the machine onto a collection tray or directly onto a conveyor that feeds downstream assembly stations.
From a performance standpoint, the feeder delivers measurable advantages in smart appliance production environments. Dimensional accuracy of each cut piece ensures proper fit during final assembly, reducing rework and part misalignment at downstream robotic placement heads. Consistent blade geometry produces clean sheared edges without burrs, which matters for panels that contact sensitive PCBs inside appliance control modules. Continuous roll processing means fewer material changeovers and reduced scrap between cutting cycles, contributing to improved material utilisation across the production schedule.
명세서
| 목 | 사양 | 목 | 사양 |
| 수유 방법 | 먼저 뽑은 다음 자르세요 | 조작 패널 | 3.5인치 TFT 컬러 화면, 480×320 픽셀, 정전식 터치스크린 |
| Component Type | 롤 형태의 재료 | 급식 속도 | 무단계 속도 조절, 최대 100mm/s |
| 전압 | DC 24.0V | 대기 전력 | <20W |
| 현재 | 최대 5.0A | Operating Temperature | -20~65°C |
| 급이정확도 | ±0.2 | 작동 습도 | 20~90%RH, 비응축형 |
| 피드 위치 조정 | X: 기계적 한계 조정; Y: 소프트웨어 조정; Z: 기계적 조정 |
보관 온도 | -40~85°C |
| 에어 서플라이 사양 | 0.40~0.60 MPa | 보관 시 습도 | 10~95% |
| 통신 인터페이스 | GPIO NPN/PNP 유형 | 서비스 수명 | 20,000시간 이상 (25°C) |
| 하드웨어 통신 | GPIO, RS232, TCP/IP | 치수 | 제품 사양에 따라 |
https://www.youtube.com/@allaismt
For more information about the Large-size Tin Sheet Cutting Feeder, 자세한 내용은 이메일을 보내주세요.
문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.
