Selectable Tape Return Mode on the Axial Feeder K-Type Adapting to Line Layouts

Giới thiệu

The Axial Feeder K-Type processing envelope encompasses the full spectrum of horizontal tape-packaged passive and active components, including horizontal resistors, horizontal transistors, and taped jumper wires. Its auto-calibrating rail accommodates the dimensional variance across these component families through stepper-driven width adjustment without fixture substitution, while the severing assembly’s adaptive gap regulation automatically conforms to the specific lead diameter and material composition of each component type. This multi-component capability allows a single feeder to service production lines manufacturing diverse board types without dedicated feeder allocation per component category.

In relay assembly applications, the K-Type executes integrated automated U-shaped lead forming and precision lead cutting within a single feed cycle. The forming dies, actuated synchronously with the feeder’s stepping engine, bend each component’s axial leads into a U-geometry that satisfies the insertion profile dictated by relay terminal spacing, while the ceramic-coated severing blades execute a clean shear that produces burr-free lead ends essential for subsequent soldering or press-fit operations. This combined forming-and-cutting capability eliminates the need for discrete pre-forming stations, consolidating two previously sequential processes into one continuous in-feeder operation.

The Axial Feeder K-Type further offers a selectable paper tape return mode, allowing operators to configure the spent tape ejection path according to line layout constraints and adjacent equipment clearance. A user-selectable K-position punching option provides controlled formation of the K-bend — a lateral offset imparted to component leads that governs stand-off height and solder fillet geometry during wave soldering. This selectable K-position capability ensures that the same feeder can serve both board designs requiring precise stand-off control and those where flat insertion is preferred, maximizing the machine’s applicational breadth without hardware modification.

Axial Feeder K-Type

Mounting the Axial Feeder K-Type on Pick and Place Platforms for Fully Automated Appliance Board Assembly

In the PCB assembly lines of a smart appliance electronics factory, the Axial Feeder K-Type is mounted directly onto pick-and-place machines, transforming conventional surface-mount platforms into fully automated axial insertion stations. Its servo-actuated stepping engine drives each feed cycle in precise synchronization with the placement head’s pickup cadence, sustaining continuous supply of axial resistors and fuses across the high-mix board portfolios typical of smart appliance manufacturing — where washing machine motor controllers, refrigerator inverter boards, and air-conditioner power modules frequently share the same production line, each demanding dense resistor networks for signal conditioning alongside critical fuse elements for overcurrent protection.

The K-Type’s auto-calibrating rail accommodates the dimensional variance between these two functionally distinct yet physically similar horizontal tape-packaged component families through stepper-driven width adjustment that executes one-touch zeroing without fixture substitution. When a production run shifts from a microwave oven control board populated with precision resistors governing timing circuits to an air-conditioner power input board requiring current-limiting fuses safeguarding the compressor drive stage, the feeder reconfigures its material channel within seconds, eliminating the manual tooling changes and operator interventions that traditionally bottleneck mixed-model appliance lines where resistor and fuse inventories coexist on the same shop floor.

A selectable tape return mode further enhances line-layout adaptability, allowing the spent tape ejection path from both resistor and fuse feed cycles to be configured according to the spatial constraints of adjacent equipment in compact appliance manufacturing cells. By consolidating axial resistor feeding, fuse handling, width calibration, and tape management within a single mounting-compatible module, the K-Type directly replaces labor-intensive manual insertion and pre-forming operations, elevating pick-and-place machine utilization rates and compressing the per-board cycle time that governs appliance electronics throughput.

Thông số kỹ thuật

https://www.youtube.com/@allaismt

For more information about the Axial Feeder K-Type, Vui lòng gửi email đến

info@allaismt.com

Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.