Introdução
The Yinuo Automatic Tray Feeder structures its operating sequence around a bidirectional shuttle that cycles between three functional zones arranged along a common rail axis. A loaded-tray storage compartment occupies the upstream terminus, a precision pickup window defines the central zone, and an empty-tray recovery stacker sits at the downstream terminus. The shuttle begins each cycle by traveling upstream to the storage compartment, where a tray-separation mechanism isolates the lowest full tray from the stack and transfers it onto the shuttle deck. Latching clamps secure the tray perimeter to prevent lateral displacement during downstream translation.
With the loaded tray secured, the shuttle translates to the central pickup window and engages a kinematic coupling that fixes its position to a known datum. Recipe-driven indexing then moves the tray in incremental steps along mapped X-Y coordinates, presenting each component pocket at the nozzle engagement point. At each indexed position, a part-presence sensor confirms that a component occupies the pocket before the host pick-and-place nozzle receives a ready signal. The nozzle descends, acquires the component, and retracts; the shuttle advances to the next pocket coordinate. This pocket-by-pocket progression continues until the recipe map indicates that all populated positions on the current tray have been cleared.
Following tray depletion, the shuttle decouples from the pickup window and translates downstream to the empty-tray recovery stacker. A push-bar mechanism slides the cleared tray off the shuttle deck into a guided vertical column where empty trays collect in sequence. The shuttle then reverses to the upstream storage compartment to retrieve the next loaded tray, reinitiating the cycle. This retrieval-presentation-recovery sequence operates autonomously, sustaining a steady component supply stream for high-mix 3C digital electronics assembly without intermediate operator handling.
Alimentador automático de bandejas Yinuo
Implementation and Product Application of the Yinuo Automatic Tray Feeder in 3C Electronics Factory Environments
The shuttle mechanism within the Yinuo Automatic Tray Feeder governs the translational path between the supply bank, pickup window, and recovery stacker, and its motion characteristics directly determine component presentation accuracy under continuous-duty cycles. A servo motor paired with a precision-ground ball screw drives the carriage along a linear guide rail, with encoder feedback closing the position loop at each indexed pocket stop. This closed-loop architecture enables the shuttle to sustain narrow positional deviation across thousands of translation cycles — a requisite in 3C factories where a single production shift may consume hundreds of loaded trays without intermediate calibration pauses.
Acceleration and deceleration profiles applied to the shuttle carriage are programmatically shaped to suppress inertial disturbance on the tray payload. During transit from the supply bank to the pickup window, the controller ramps velocity along an S-curve profile rather than a linear ramp, reducing the jerk impulse that could dislodge lightweight components from their pocket seats. This motion-profile refinement matters acutely in 3C electronics manufacturing, where tray-packaged devices increasingly feature miniaturized footprints with low seating depth — geometries that offer minimal mechanical retention against lateral acceleration forces during shuttle translation.
Thermal stability of the shuttle drive system contributes to long-cycle positional repeatability in factory environments where ambient temperature fluctuates across shift boundaries. The ball screw and linear rail incorporate lubrication channels that maintain film thickness under extended operation, and the encoder reference is re-established at each cycle origin when the shuttle returns to the supply bank datum.
Tray
Parâmetros
| Item | Parameter | Item | Parameter |
| Método de alimentação | Escolha e, em seguida, corte | Painel de operação | Tela colorida TFT de 3,5 polegadas, 480 × 320 pixels, capacitiva |
| Component Type | Material em rolo | Velocidade de alimentação | Controle de velocidade contínuo, máx. 100 mm/s |
| Tensão | 24,0 V CC | Potência em modo de espera | <20 W |
| Atual | 5,0 A MÁX. | Operating Temperature | -20 a 65 °C |
| Precisão na alimentação | ±0,2 | Umidade de operação | 20~90%RH, sem condensação |
| Ajuste da posição da alimentação | X: ajuste do limite mecânico; Y: ajuste de software; Z: ajuste mecânico |
Temperatura de armazenamento | -40 a 85 °C |
| Especificações de abastecimento de ar | 0,40~0,60 MPa | Umidade de armazenamento | 10~95% |
| Interface de comunicação | Tipo GPIO NPN/PNP | Vida útil | ≥20 mil horas (25 °C) |
| Comunicação de hardware | GPIO, RS232, TCP/IP | Dimensões | De acordo com as especificações do produto |
Tray
https://www.youtube.com/@allaismt
For more information about the Alimentador automático de bandejas Yinuo, Por favor, envie um e-mail para
Responderemos à sua solicitação prontamente e forneceremos informações detalhadas sobre nossos produtos e serviços.
