Giới thiệu
Cái Yinuo Sheet Front Pushing Feeder handles flat-sheet auxiliary materials — labels, protective films, foam pads, double-sided adhesive patches, conductive adhesive strips, copper foils, steel plates, and reinforcement panels — through a multi-step feed protocol. A suction pad retrieves a single sheet from the in-line cassette and places it onto the stripping blade position; a gripper jaw clamps the front blank margin while a pressure cylinder drives a hold-down block onto the rear blank margin, anchoring the sheet for controlled advancement. The placement nozzle lifts, returns to the cassette pickup station, and the gripper pulls the material tape forward to index the next piece into the nozzle pickup zone.
The 25mm minimum blank-margin requirement at both ends of each sheet ensures that all clamping and hold-down forces act exclusively on non-productive zones, preserving the functional material area from deformation or adhesive contamination. Feed stroke length, pull velocity, and dwell interval are recipe-programmable, allowing operators to recalibrate for materials of differing thickness, stiffness, or tack level without disassembling the drive train. Thin release liners, stiff steel reinforcement plates, and compressible foam inserts all run on the same hardware — only the parameter set changes.
The clamping-and-pulling mechanism contains few moving elements, keeping wear rates low and service intervals infrequent. Installation conforms to prevailing platform standards without proprietary brackets or firmware overrides. Recipe-level programmability, dual-margin clamping accuracy, and mechanical simplicity combine to make the Yinuo Sheet Front Pushing Feeder a single, adaptable unit for diverse sheet-material feeding tasks.
Yinuo Sheet Front Pushing Feeder
Color-coded dot labels are a staple of home appliance electronics assembly for quality status marking, production-shift identification, and batch traceability. These small-format labels (8–12mm diameter) populate dense grid patterns on flat backing sheets, defying tape-and-reel feeding conventions. The Yinuo Sheet Front Pushing Feeder processes each sheet through a structured advancement cycle, feeding color labels directly to the placement head for automated application onto appliance components without manual sheet handling.
Operation follows four linked phases: a suction cup draws one sheet from the storage cassette and deposits it at the stripping blade location; a pull-gripper seizes the front blank margin while a pneumatic press block anchors the rear blank margin; the nozzle completes extraction and returns to the cassette; the gripper advances the tape to position the next sheet for nozzle pickup. Blank margins of ≥25mm at both ends isolate all clamping forces from the active label area, safeguarding adhesive integrity and dot geometry. Feed increment, pull speed, and dwell duration are programmable at the recipe level, supporting rapid transitions across label colors, diameters, and backing-sheet grammages through software adjustment alone.
From a market standpoint, the Yinuo Sheet Front Pushing Feeder compresses color-label handling into a single, adaptable platform — reducing capital expenditure on multiple dedicated carriers and shrinking floor-space demand. Its mechanically simple pull-gripper chain curtails downtime and extends operational lifespan. Platform-standard mounting preserves existing line configurations. Recipe adaptability, margin-protected clamping, and robust construction together offer home appliance electronics manufacturers a high-mix, uptime-reliable feeding solution for small-format color-coded label mounting — where label diversity and placement continuity must advance in parallel.
Parameters
| Mục | Parameter | Mục | Parameter |
| Feeding Method | Peel onto anti-adhesion platform, then pick | Bảng điều khiển hoạt động | 3.5″ TFT touchscreen, 480×320 pixels, capacitive |
| Component Type | Strip components (blank area required at both ends) |
Feeding Speed | Stepless speed control, max 100mm/s |
| Voltage | DC 24.0V | Power Consumption | <20W |
| Current | 5.0A MAX | Operating Temperature | -20~65°C |
| Feeding Accuracy | ±0.5 | Operating Humidity | 20~90%RH, non-condensing |
| Feed Position Adjustment | X: mechanical limit adjustment; Y: software adjustment; Z: mechanical adjustment |
Storage Temperature | -40~85°C |
| Air Supply Spec | 0.40~0.60 MPa | Storage Humidity | 10~95% |
| Communication Interface | GPIO NPN/PNP type | Tuổi thọ sử dụng | ≥20K hrs. (25°C) |
| Hardware Communication | GPIO, RS232, TCP/IP | Dimensions | Per product specification |
| Drive Method | Electric + Pneumatic | Cân nặng | Per product specification |
https://www.youtube.com/@allaismt
For more information about the Yinuo Sheet Front Pushing Feeder, Vui lòng gửi email đến
Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.
