Giới thiệu
Cái Tủ đựng khay provides a mechanical solution for transferring tray-packed electronic components between a storage arrangement and an automated insertion station. Its operating concept is based on coordinated vertical and horizontal movement rather than direct manual delivery of every component. The tray section accommodates 15 trays, with a maximum individual tray size of L240 × W350 × H30 mm. This configuration gives equipment planners a defined physical envelope when arranging material stations around PCB assembly machinery. The cabinet uses a 220V power supply and operates with compressed air at 4–7 BAR, supporting the mechanical actions required for tray positioning and component transfer.
The extraction sequence begins when the tray support establishes the working level for the selected component. The XY-axis mechanism travels to the programmed tray location, engages the component with a suction cup or clip, and moves it to the C feeding track. These movements address two distinct handling requirements: reaching the correct source coordinate and delivering the retrieved part to the next mechanical interface. The selected gripping method depends on the component’s physical characteristics and the applicable handling arrangement. By assigning extraction and delivery to a dedicated mechanism, the cabinet separates bulk tray access from the repeated component-transfer movements required by the insertion machine. During manual tray replacement, the automatic lifting movement remains inactive.
The final transfer stage depends on the receiving machine’s pickup geometry and component orientation. Parts move toward the D pickup position, with positioning adjusted to the connected equipment model. When required, the pickup station flips components before collection by the insertion head. The operating specification identifies continuous feeding for 2 seconds across 10 cycles and a 3-second waiting interval for tray rotation per cycle. External tray replacement supports material replenishment when the screen configuration permits. Key considerations include tray compatibility, gripping suitability, coordinate setup, and alignment between discharge positioning and machine pickup requirements.
Tủ đựng khay
Tray Cabinet for Automated Machinery Controller Production and Coordinate Based Component Transfer
Cái Tủ đựng khay can serve industrial electronics factories producing PLC boards, motor control systems, servo drive electronics, and automated machinery controllers. These production lines often require tray-packed components to be delivered individually to insertion equipment at predetermined locations. The cabinet coordinates component retrieval through programmed tray coordinates and horizontal transfer movements, allowing the feeding process to follow the receiving machine’s material requirements. Its operating concept separates component selection from final collection, giving the insertion line a dedicated mechanism for transferring parts from prepared trays to the pickup station.
During assembly of a motor drive control board, the operator loads the required components into their assigned tray positions. The tray base rises to establish the extraction level, and the XY-axis assembly moves to the selected location. A suction cup or mechanical clip engages the component and transfers it to the C feeding track. After the part reaches the D pickup area, the insertion machine collects it for placement on the PCB. The extraction sequence can be configured around the material positions and the receiving equipment’s operating data, making it possible to coordinate component delivery with the production program rather than relying on repeated manual retrieval.
The cabinet’s principal performance characteristics include programmed component access, automated horizontal transfer, controlled tray movement, and machine-dependent discharge positioning. Its feeding sequence specifies 2 seconds of continuous feeding over 10 cycles, with a 3-second waiting interval for tray rotation per cycle. Where component orientation must be changed before insertion, the pickup position incorporates a flipping action. The external tray exchange function can also support replenishment during production when the display configuration permits this operating mode. Together, these features make the Tray Cabinet a practical material handling unit for industrial electronics lines that require repeatable component retrieval and coordinated delivery to insertion machinery.
Thông số kỹ thuật
| Người mẫu | YN-C2501 | |
| Kích thước (Dài × Rộng × Cao) | 1380×700×1361.5 | Đơn vị: mm |
| Cân nặng | 213.5KG | |
| Operating Voltage | 220 V AC | |
| Yêu cầu về nguồn cung cấp khí | 0,5–0,7 MPa | |
| Công suất tối đa | 750W | |
| Feed Speed | 2s/Pcs | |
| Bảng điều khiển hoạt động | 7″ IPS 1024*600 Display Screen | |
| Kênh | Một kênh | |
| Function | Tùy chọn | |
| Khay phù hợp | Please refer to the drawing below | Mặc định: Không có |
| Overall Configuration | Sensors and sensor control devices use loose brands; motors use Panasonic; solenoid valves use Airtac; touch screen uses Leisai; wire harnesses are custom-made; control system uses industrial controller. |
https://www.youtube.com/@allaismt
For more information about the Tủ đựng khay, Vui lòng gửi email đến
Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.
