Giới thiệu
The Radial Insertion Feeder, featuring a 70 mm body width, is engineered for the stable and orderly presentation of taped radial components in automated electronics production. Its feeding mechanism advances components at a controlled pitch, helping each leaded part arrive at the pickup or insertion position with consistent orientation. By omitting the cutter assembly, the feeder offers a streamlined configuration suited to production environments where tape trimming is unnecessary or handled by a separate process. This focused design reduces mechanical complexity while preserving dependable component delivery.
A rigid feeder structure supports accurate tape guidance and minimizes unwanted movement during continuous operation. The 70 mm width provides a practical balance between equipment compatibility, component accommodation, and installation efficiency. Careful control of the tape path helps prevent skewing, irregular indexing, and lead deformation—issues that can interrupt automated insertion and influence final assembly quality. Its straightforward architecture also allows operators to monitor material movement clearly, making routine setup, adjustment, and replenishment more efficient.
Designed for repeatable performance, the feeder is well suited to radial components used in power supplies, control boards, household appliances, industrial electronics, and other through-hole assemblies. Fewer cutting-related parts mean fewer wear points, simplified maintenance, and reduced demand for blade inspection or replacement. The result is a practical feeding solution that supports stable throughput without adding functions the process does not require. For manufacturers seeking accurate presentation, durable construction, and uncomplicated operation, the Radial Insertion Feeder delivers a refined combination of productivity, reliability, and process control.
Radial Insertion Feeder
SMT-Line Integration of the Radial Insertion Feeder in Consumer Electronics Manufacturing
The Radial Insertion Feeder integrates naturally into consumer electronics assembly lines where compact radial components—electrolytic capacitors, bridge rectifiers, and power inductors—are mounted onto mainboards for smartphones, notebook chargers, and wireless audio devices. The feeder slots into existing high-speed SMT frameworks, handling radial-taped components with stable indexing accuracy that supports continuous placement cycles under variable production loads. Lines for handset power sections, Type-C PD modules, and wearable charging cradles benefit from the feeder’s ability to maintain uninterrupted component supply without frequent manual intervention, reducing idle intervals between pickup sequences.
The synchronized feed channel advances components at programmable intervals governed by the placement head’s demand signal, so each radial part reaches the pickup coordinate at the exact moment the nozzle retrieves it. This motion architecture minimizes cycle-time variance and supports stable placement repeatability across extended production shifts. Mechanical interfaces are engineered for quick replacement, allowing maintenance teams to swap worn contact elements during scheduled downtime without disassembling the surrounding module.
Recipe-driven parameter storage enables rapid product changeover, a critical advantage for 3C manufacturers managing diverse product portfolios with famously short lifecycle cycles. Operators recall pre-configured pitch settings, insertion depths, and clinch profiles directly from the placement machine’s PLC interface, eliminating manual recalibration between product runs. The feeder handles a wide range of radial component profiles—from miniature low-ESR capacitors to standard can-style electrolytics—making it suitable for mixed-model environments where throughput and uptime carry equal weight.
Thông số kỹ thuật
| Người mẫu | YN-R2203 | YN-R2201 | Ghi chú |
| Kích thước (Dài × Rộng × Cao) | 740 × 47 × 144 (110) mm | 750 × 68 × 144 (110) mm | Chiều cao điểm tiếp xúc dưới cùng: 110 mm Chiều cao tối đa (từ đáy đến tay cầm): 144 mm |
| Cân nặng | 6 kg | 8 kg | |
| Operating Voltage | DC 24V | DC 24V | |
| Yêu cầu về nguồn cung cấp khí | None | None | |
| Dòng điện tối đa | 3A | 3A | |
| Feed Speed | 0,6–2 giây/chiếc | 0,6–2 giây/chiếc | |
| Phương pháp truyền động | Hoàn toàn chạy bằng điện | Hoàn toàn chạy bằng điện | |
| Bảng điều khiển hoạt động | Màn hình màu TFT 0,96 inch Độ phân giải màn hình: 80×160 pixel |
Màn hình màu TFT 0,96 inch Độ phân giải màn hình: 80×160 pixel |
|
| Lỗi bước cắt vật liệu | ±0,2 mm | ±0,2 mm | |
| Khoảng cách giữa các dải băng áp dụng | 12,7 mm/15 mm | 12,7 mm/15 mm | Cần có phụ tùng thay thế |
| Chức năng cắt băng | Tùy chọn | Tùy chọn | YN-R2203: Có dao cắt YN-R2201: Không có dao cắt |
| Hàm uốn cong | Tùy chọn | Tùy chọn | Việc uốn cong có thể được điều chỉnh tùy theo loại vật liệu |
| Tuổi thọ của dao cắt | ≥1 triệu lần | ≥1 triệu lần |
https://www.youtube.com/@allaismt
For more information about the Radial Insertion Feeder, Vui lòng gửi email đến
Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.
