Giới thiệu
The Radial Feeder With Cutter accommodates radial-component tape widths up to 70 mm, integrating a servo-driven advance mechanism with an onboard cutter module that separates components from their carrier at the pick-up station. Tape indexing proceeds through a precision-guided channel where optical verification confirms each component’s orientation before the cutter engages, ensuring uniform presentation for downstream nozzle acquisition. The cutter blade executes a programmable stroke, adapting its cutting depth and timing to match varying tape material thicknesses without manual recalibration.
Separation accuracy is maintained across extended production runs through a closed-loop servo system that regulates both feed pitch and blade engagement force. The 70 mm channel width supports multi-row radial tapes, allowing simultaneous indexing of adjacent component lanes within a single feed cycle. Thermal management within the cutter assembly prevents blade degradation during sustained operation, while a quick-release mechanism enables on-site blade replacement without specialized tooling.
Integration with prevailing SMT platform standards is achieved through a universal mounting interface and recipe-driven parameter storage, where each cutter profile and feed sequence is recalled upon line changeover. The feeder excels in high-mix assembly environments where rapid transition between radial component variants is required, delivering reliable component singulation and positioning for automotive electronics, industrial control assemblies, consumer devices, and LED lighting applications.
Radial Feeder Without Cutter (70mm Width)
Radial Feeder With Cutter 70mm Width Programmable Blade Stroke SMT Radial Component Handling
The Radial Feeder With Cutter handles 70 mm radial-component carrier tape through a servo-driven indexing channel paired with an integrated cutter module that singulates each component at the pick-up station. Tape advancement proceeds along a precision-guided path where optical verification confirms component orientation before the cutter engages, presenting uniformly aligned radial parts for downstream nozzle acquisition. The programmable blade stroke adapts its cutting depth and timing to varying carrier tape substrate thicknesses without requiring manual recalibration between component variants.
Cutting accuracy is sustained across extended operating cycles through a closed-loop servo system that regulates both feed pitch and blade engagement force simultaneously. The 70 mm channel width accommodates multi-row radial tapes, permitting parallel advancement of adjacent component lanes within a single indexing stroke. Thermal regulation within the cutter assembly mitigates blade edge degradation during sustained operation, while a quick-release mechanism enables on-site blade replacement without specialized tooling or recalibration procedures.
Recipe-driven parameter storage encodes cutter timing, blade stroke depth, and feed pitch as recallable profiles, each invoked instantly during component changeover. The feeder conforms to prevailing SMT platform standards through a universal mounting interface and standardized communication protocol. It excels in automotive electronics, industrial control assemblies, consumer device manufacturing, and LED lighting applications.
Thông số kỹ thuật
| Người mẫu | YN-R2203 | YN-R2201 | Ghi chú |
| Kích thước (Dài × Rộng × Cao) | 740 × 47 × 144 (110) mm | 750 × 68 × 144 (110) mm | Chiều cao điểm tiếp xúc dưới cùng: 110 mm Chiều cao tối đa (từ đáy đến tay cầm): 144 mm |
| Cân nặng | 6 kg | 8 kg | |
| Operating Voltage | DC 24V | DC 24V | |
| Yêu cầu về nguồn cung cấp khí | None | None | |
| Dòng điện tối đa | 3A | 3A | |
| Feed Speed | 0,6–2 giây/chiếc | 0,6–2 giây/chiếc | |
| Phương pháp truyền động | Hoàn toàn chạy bằng điện | Hoàn toàn chạy bằng điện | |
| Bảng điều khiển hoạt động | Màn hình màu TFT 0,96 inch Độ phân giải màn hình: 80×160 pixel |
Màn hình màu TFT 0,96 inch Độ phân giải màn hình: 80×160 pixel |
|
| Lỗi bước cắt vật liệu | ±0,2 mm | ±0,2 mm | |
| Khoảng cách giữa các dải băng áp dụng | 12,7 mm/15 mm | 12,7 mm/15 mm | Cần có phụ tùng thay thế |
| Chức năng cắt băng | Tùy chọn | Tùy chọn | YN-R2203: Có dao cắt YN-R2201: Không có dao cắt |
| Hàm uốn cong | Tùy chọn | Tùy chọn | Việc uốn cong có thể được điều chỉnh tùy theo loại vật liệu |
| Tuổi thọ của dao cắt | ≥1 triệu lần | ≥1 triệu lần |
https://www.youtube.com/@allaismt
For more information about the Radial Feeder With Cutter (70mm Width), Vui lòng gửi email đến
Chúng tôi sẽ phản hồi yêu cầu của bạn trong thời gian sớm nhất và cung cấp cho bạn thông tin chi tiết về các sản phẩm và dịch vụ của chúng tôi.
