Introdução
O Alimentador de tubos SMT presents a resilient material supply solution whose hardened construction endures the punishing conditions of mass electronics production, holding performance integrity shift after shift without degradation or attention. Wear-resistant contact surfaces withstand repeated component friction along the feed lane, retaining dimensional fidelity across countless advancement cycles. Stalwart framing opposes deformation under mechanical stress, keeping the feed track true and unaltered through years of industrial service in challenging factory atmospheres marked by heat, dust, and chemical exposure.
Tenacious drive elements tolerate thermal variation, mechanical shock, and electrical fluctuation without surrendering functional consistency, performing with identical behavior on the final cycle as on the first. Corrosion-resistant finishes shield exposed surfaces from humidity, flux vapor, and cleaning agents prevalent in electronics assembly settings, stretching service intervals and reducing replacement frequency. Sealed electronic compartments block dust ingress and conductive debris, sheltering internal circuitry from the contamination that shortens equipment life in unprotected designs. This enduring build approach translates into lower ownership burden and fewer unplanned stoppages across the feeder’s full lifespan.
Substantial structural elements shrug off the cumulative effects of vibration and repeated handling, guarding mechanical integrity throughout the unit’s working life. The feeder mounts onto conventional equipment rails via corrosion-protected hardware whose attachment integrity outlasts atmospheres where ordinary assemblies loosen and fail. In facilities prioritizing equipment longevity and total ownership value, the Tube Feeder excels in offering lasting reliability where environmental severity and relentless usage intensity would compromise feeders built to lesser standards.
Alimentador de tubos SMT
Advanced SMT Tube Feeder for Traffic Electronics – Gentle Handling, Quick Changeover, and Uninterrupted Production
O Alimentador de tubos SMT is essential in LED traffic signal PCB assembly, delivering tube-packaged components like LED chips, driver ICs, and connectors to pick-and-place machines with reliability. Unlike tape reels, tube packaging suits components with special shapes or sensitivity to mechanical stress. The feeder moves parts one by one from tubes to a fixed pickup point using gentle mechanisms, ensuring the placement machine grabs each component precisely every time. This integration minimizes misfeeds and production stops caused by unstable supply, supporting consistent high-volume output for traffic light boards.
A major advantage is superior component protection. Traffic signal LEDs and electronics demand extreme reliability, and their parts must avoid bent leads or surface damage during assembly. The tube packaging and controlled feeding action shield components from mechanical stress far better than bulk feeding methods. This protection is critical for LEDs with sensitive optical surfaces or electrostatic-sensitive devices, reducing damage rates throughout the feeding process. Lower damage directly translates to higher first-pass yield and less rework, which matters greatly for large-scale traffic light PCB manufacturing where quality and cost efficiency are non-negotiable.
The feeder also delivers flexibility and quick changeover between different traffic light PCB models. Modern designs allow factories to switch tube-packaged components rapidly without complex mechanical adjustments. Advanced models support multiple tubes stacked together, enabling long unattended production runs with automatic switching when one tube empties. This flexibility helps factories respond quickly to varied orders while maintaining high equipment effectiveness.
Especificações
| Modelo | YN-T2112 (Faixa Única) | YN-T2112H (Trilha única com corte) | YN-T2109 (dupla faixa) |
| Dimensões (C × L × A) | 1.500 × 76 × 1.140 mm | 1.500 × 76 × 1.140 mm | 1.500 × 90 × 1.140 mm |
| Peso | 35KG | 95 kg | 40 kg |
| Operating Voltage | 220 V CA | ||
| Abastecimento de ar necessário | 0,5–0,7 MPa | ||
| Corrente máxima | 2A | ||
| Feed Speed | <2 s/unidade | ||
| Painel de operação | Tela OLED de 1,54 polegadas | ||
| Tempo de troca de canal | <6s | ||
| Canal | Canal único （Opcional: canal único/duplo） |
Canal único （Opcional: canal único/duplo） |
Dois canais （Opcional: canal único/duplo） |
| Função de dobra de chumbo | Opcional（Padrão: Nenhum） | ||
| Função de modelagem | Opcional（Padrão: Nenhum） | ||
| Função pré-elevação | Opcional（Padrão: Nenhum） | ||
| Função de corte | Opcional（Padrão: Nenhum） | Sim | Opcional（Padrão: Nenhum） |
| Comprimento de corte | Opcional（Padrão: Nenhum） | Personalizável de acordo com os requisitos de material | Opcional（Padrão: Nenhum） |
| Intervalo de corte | Opcional（Padrão: Nenhum） | ±1 mm（Ajustável） | Opcional（Padrão: Nenhum） |
| Comprimento do tubo aplicável | 400–600 mm | 400–600 mm | 400–600 mm |
| Altura do tubo aplicável | 10 mm–45 mm | 10 mm–45 mm | 10 mm–45 mm |
| Largura do tubo compatível | 10 mm–40 mm | 10 mm–40 mm | 10 mm–28 mm |
https://www.youtube.com/@allaismt
For more information about the Alimentador de tubos SMT, Por favor, envie um e-mail para
Responderemos à sua solicitação prontamente e forneceremos informações detalhadas sobre nossos produtos e serviços.
