Introdução
O Alimentador automático de jumpers transforms what was once a labor-intensive PCB assembly step into a fully automated, high-throughput process. By taking over the manual feeding of jumper wires, the machine handles continuous spools of jumper material — cutting, stripping, forming, and inserting each wire in rapid sequence. This uninterrupted workflow keeps pace with the fastest production lines, feeding jumpers directly into designated positions on the board as it moves through the assembly conveyor. The material handling system maintains uniform tension and orientation, preventing the kinks, twists, or off-angle insertions that plague manual operations.
What sets this feeder apart is its intelligent coordination with upstream and downstream processes. It reads the PCB layout data to identify jumper locations, then synchronizes its feeding sequence with the solder paste printer and component placer ahead of it, as well as the reflow or wave soldering station behind it. This orchestration ensures that jumper wires arrive at the board at exactly the right moment — after paste deposition but before thermal processing — so they bond securely to the circuit without rework. The feeder adapts to mixed board designs automatically, switching between jumper types without operator intervention.
The Automatic Jumper Feeder sustains uninterrupted operation through a dual-spool magazine that loads a fresh jumper material reel while the active spool is still feeding, eliminating downtime for replenishment. Its high-speed cutting and forming head processes each jumper wire independently of the insertion stroke, preparing the next wire while the current one is being placed into the board. The machine’s onboard diagnostics module continuously monitors feed motor torque, cutter edge condition, and insertion force, automatically adjusting operational parameters to maintain consistent output quality throughout extended runs.
Alimentador automático de jumpers
Automating Jumper Placement on Continuous-Flow Assembly Lines
In high-volume consumer electronics production — where lines run around the clock and every second of dwell time ripples through quarterly output — the Automatic Jumper Feeder operates as a fully synchronized node within the continuous-flow assembly line. The machine receives board panels directly from the upstream solder paste printer, processes every jumper position on the panel in a single pass, and releases completed boards to the downstream reflow oven at the line’s native throughput rate. Its dual-spool magazine swaps empty jumper wire reels automatically mid-production, sustaining uninterrupted feeding across full shifts without operator intervention.
The feeder’s cutting and forming module works on a parallel architecture: while one jumper wire is being inserted into a board position, the next wire is simultaneously cut, stripped, and bent to specification in the preparation chamber. This overlapping cycle eliminates idle head travel and keeps the placement rate consistent regardless of jumper density per board. All jumper forming parameters — wire length, strip length on each end, bend radius, and lead orientation — are driven digitally from the production recipe, ensuring every board in a million-unit run carries jumpers identical in geometry and electrical performance.
Within the factory, the Alimentador automático de jumpers removes the last manual dependency from high-speed SMT lines. The machine’s onboard process data recorder timestamps every insertion event, logs insertion force curves, and correlates each jumper to a unique board serial number, building a traceable quality record that satisfies both internal audit requirements and OEM customer compliance standards. For a manufacturing plant producing consumer devices at scale, this level of automation at the jumper placement stage eliminates a residual source of human error and delivers the repeatable output quality that volume buyers demand.
Especificações
| Modelo | YN-J2303 | Observações |
| Dimensões (C × L × A) | 624 × 78 × 160 mm | |
| Peso | 6,5 kg | |
| Operating Voltage | DC 24V | |
| Abastecimento de ar necessário | None | |
| Corrente máxima | 2,5 A | |
| Feed Speed | 1,5 s/unidade | |
| Painel de operação | TFT de 0,96″ Resolução da tela colorida: 80×160 pixels |
|
| Tempo de troca | 3 min | |
| Canal | Canal único | |
| Função de dobra de chumbo | Dobragem | |
| Função pré-elevação | Serviço de transporte antes do evento disponível | |
| Função de corte | Limite | |
| Função de correção | Correção | |
| Diâmetro do fio do material | 0,4–1 mm | Não é possível usar a matriz de conformação de 0,6 mm para conformar um fio de 0,4 mm; Só é possível usar uma matriz de 0,6 mm para fio de 0,6 mm |
| Espaçamento entre trilhos | 5–26 mm (A matriz de conformação depende do diâmetro do fio) Molde em forma de cruz: 3 tamanhos em um conjunto (grande/médio/pequeno) |
Não é possível usar a matriz de conformação de 16 mm para o passo de trilho de 16 mm; É necessário usar uma matriz de 16 mm de comprimento |
| Comprimento da ponta de conformação | 2,0 a 5,5 mm | Dentro dessa faixa, só é possível obter comprimentos diferentes utilizando diferentes matrizes de conformação de tamanhos correspondentes |
https://www.youtube.com/@allaismt
For more information about the Alimentador automático de jumpers, Por favor, envie um e-mail para
Responderemos à sua solicitação prontamente e forneceremos informações detalhadas sobre nossos produtos e serviços.
