Industrial Factory Copper Foil Yinuo Automatic Cutting Feeder Material Feed

Wstęp

Ten Yinuo Automatic Cutting Feeder uses independent rear and front clamp actuation to feed, fix, cut, and retrieve roll-format materials in a coordinated cycle. Material advance relies on rear clamp grip alone — the front clamp stays retracted, so the material surface passes through the front clamp zone without contact against a closed clamp face. This open-front feed limits adhesive residue buildup on internal tooling and preserves substrate flatness across varied material types, from thin protective films to thicker foam-backed tapes and copper foil rolls.

Feed position reached, the front clamp engages and the rear clamp opens, retracting to a set distance before re-tightening. This clamp reversal creates a stationary material zone under the cutting head, mechanically isolated from reel-side tension variation. A suction nozzle grips the material at the cut line, the blade trims through, and the front clamp opens. The nozzle lifts the cut segment and transfers it to the pickup station without the segment resting against the blade housing.

Blade inserts swap out for different material widths, allowing a single unit to serve multiple material specifications without recalibration or full feeder changeover. The feeder processes masking tapes, protective films, labels, foams, double-sided adhesives, conductive adhesives, copper foils, steel sheets, stiffener boards, and high-temperature tapes. The clamp-and-release sequencing, open-front feed path, and insert-level blade interchange form the core mechanical approach to material handling and format flexibility.

Yinuo Automatic Cutting Feeder

Using Yinuo Automatic Cutting Feeder for Copper Foil Roll in Industrial Electronics Production

Industrial electronics equipment — servo drives, inverter modules, power supply chassis — uses copper foil segments for shielding continuity, ground-path bonding, and thermal conduction. The Yinuo Automatic Cutting Feeder processes copper foil rolls by advancing the strip through a rear-clamp-only feed motion. With the front clamp open during transport, the foil does not experience the bidirectional grip that can deform its cross-section or imprint surface marks. Copper foil with a thickness below 0.1 mm bends under clamp pressure; keeping the front side free during feed preserves the flat profile needed for uniform surface contact in shielding and grounding applications.

Position reached, the front clamp closes, the rear clamp releases and retracts to its setback, then grips again. The foil strip is now stationary under the blade. A suction nozzle holds the foil surface at the cut line, the blade trims, the front clamp opens, and the nozzle retrieves the segment. Transfer to the pickup zone occurs immediately after clamp release.

Interchangeable blade assemblies accommodate different foil widths. The feeder handles copper foil rolls for EMI shielding strips, grounding connections, conductive bonding, and thermal interface layers across industrial electronics manufacturing. Surface flatness, edge quality, and cut-length accuracy are addressed through the open-front feed path and the sequenced clamp-release-retrieve cycle.

Specyfikacje

https://www.youtube.com/@allaismt

For more information about the Yinuo Automatic Cutting Feeder, proszę wysłać e-mail na adres

info@allaismt.com

Szybko odpowiemy na Twoje zapytanie i udzielimy Ci szczegółowych informacji o naszych produktach i usługach.