소개
Automotive electronics production runs on variety. A single assembly line might handle twenty different tape-backed materials in one shift — paper labels for traceability, foam pads for vibration damping, copper foil for thermal management, steel stiffeners for FPC connector reinforcement, conductive adhesive strips for EMI grounding. Each material has its own thickness, stiffness, surface tack, and peeling behavior. The Yinuo Intelligent Short Front Pushing Feeder is designed to handle this diversity without requiring separate feeding hardware for each material category.
The feeder’s peel module maintains a controlled peel angle across the full material spectrum, from ultra-thin protective films to rigid steel plates. The front-pushing stroke length is adjustable, so thinner materials are not over-driven and thicker ones are not under-fed. Backing paper take-up is synchronized with the peel cycle, preventing slack or tension buildup that could misalign the next peel position. The feed path is open and accessible, which matters when dealing with adhesive-backed materials that occasionally leave residue or when copper foil edges need visual confirmation before pickup.
For the factory floor, this versatility translates into real operational gains. Rather than stocking and maintaining multiple different feeder models for different material families, the production engineering team can standardize on a single platform. Changeover between material types takes minutes instead of requiring a complete feeder swap. When a new vehicle program introduces a different tape format — a slightly thicker foam, a narrower copper strip — the existing feeders adapt without hardware modification. Over a production year spanning multiple automotive programs, the reduction in changeover downtime and feeder inventory alone justifies the investment.
Yinuo Intelligent Short Front Pushing Feeder
How Yinuo Intelligent Short Front Pushing Feeder is Applied in Automotive Electronics Assembly
Automotive electronics assembly involves a broad range of flexible roll materials — paper labels, protective films, foam gaskets, double-sided adhesives, conductive adhesives, copper foil, steel sheets, and reinforcement boards. Each material must be peeled and fed at the correct position and timing so that downstream placement, lamination, or bonding steps can proceed without interruption. On lines producing ECU housings, BMS modules, and ADAS sensor units, the feeding stage directly influences both cycle time and material waste, making automatic peel-and-feed capability a practical necessity rather than a convenience.
Yinuo Intelligent Short Front Pushing Feeder handles these roll materials through a front-pushing mechanism that achieves automatic peeling and feeding in one continuous motion. Its industrial-grade intelligent design supports fast feeding speed with adjustable parameters, allowing operators to tune feed behavior to match each material’s peel characteristics. The feeder offers both online mode and automatic mode, giving users flexibility to integrate it into automated equipment chains or run it as a standalone station. A color touchscreen provides straightforward parameter display and setup, while GPIO and RS232 communication options ensure compatibility with various host systems.
For automotive electronics manufacturers, the feeder’s ability to handle diverse roll materials through a single intelligent platform reduces equipment variety and simplifies line planning. Anomaly alarm output and remote reset support minimize downtime when irregularities arise, keeping production flowing during long shift schedules. By combining strong material compatibility, configurable feeding parameters, and accessible communication interfaces, Yinuo Intelligent Short Front Pushing Feeder serves as a highly practical feeding solution that raises automation maturity on automotive electronics production lines.
명세서
| 목 | 사양 | Parameter | 사양 |
| 수유 방법 | Peel tape onto receiving platform, then pick up | Operation Interface | 3.5″ TFT color screen, 480×320 resolution, capacitive touchscreen |
| Material Type | Tape-on-reel | 급식 속도 | Stepless speed regulation, max 100mm/s |
| 전압 | DC 24.0V | 대기 전력 | <20W |
| 현재 | 최대 5.0A | Operating Temperature | -20°C to 65°C |
| 급이정확도 | ±0.2mm | 작동 습도 | 20% to 90% RH, no condensation |
| Material Position Adjustment | X-direction: mechanical limit adjustment; Y-direction: software adjustment; Z-direction: mechanical adjustment |
보관 온도 | -40°C to 85°C |
| Input Air Pressure | 0.40MPa to 0.60MPa | 보관 시 습도 | 10% to 95% |
| 통신 인터페이스 | GPIO NPN/PNP 유형 | Lifespan | 20,000시간 이상 (25°C) |
| Program Interface | GPIO 232, TCP/IP | 치수 | Refer to actual product specifications |
| 구동 방식 | Motor + pneumatic | 무게 | Refer to actual product specifications |
https://www.youtube.com/@allaismt
For more information about the Yinuo Intelligent Short Front Pushing Feeder, 자세한 내용은 이메일을 보내주세요.
문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.
