導入
Automotive electronics production runs on variety. A single assembly line might handle twenty different tape-backed materials in one shift — paper labels for traceability, foam pads for vibration damping, copper foil for thermal management, steel stiffeners for FPC connector reinforcement, conductive adhesive strips for EMI grounding. Each material has its own thickness, stiffness, surface tack, and peeling behavior. The Yinuo Intelligent Short Front Pushing Feeder is designed to handle this diversity without requiring separate feeding hardware for each material category.
The feeder’s peel module maintains a controlled peel angle across the full material spectrum, from ultra-thin protective films to rigid steel plates. The front-pushing stroke length is adjustable, so thinner materials are not over-driven and thicker ones are not under-fed. Backing paper take-up is synchronized with the peel cycle, preventing slack or tension buildup that could misalign the next peel position. The feed path is open and accessible, which matters when dealing with adhesive-backed materials that occasionally leave residue or when copper foil edges need visual confirmation before pickup.
For the factory floor, this versatility translates into real operational gains. Rather than stocking and maintaining multiple different feeder models for different material families, the production engineering team can standardize on a single platform. Changeover between material types takes minutes instead of requiring a complete feeder swap. When a new vehicle program introduces a different tape format — a slightly thicker foam, a narrower copper strip — the existing feeders adapt without hardware modification. Over a production year spanning multiple automotive programs, the reduction in changeover downtime and feeder inventory alone justifies the investment.
Yinuo Intelligent Short Front Pushing Feeder
How Yinuo Intelligent Short Front Pushing Feeder is Applied in Automotive Electronics Assembly
Automotive electronics assembly involves a broad range of flexible roll materials — paper labels, protective films, foam gaskets, double-sided adhesives, conductive adhesives, copper foil, steel sheets, and reinforcement boards. Each material must be peeled and fed at the correct position and timing so that downstream placement, lamination, or bonding steps can proceed without interruption. On lines producing ECU housings, BMS modules, and ADAS sensor units, the feeding stage directly influences both cycle time and material waste, making automatic peel-and-feed capability a practical necessity rather than a convenience.
Yinuo Intelligent Short Front Pushing Feeder handles these roll materials through a front-pushing mechanism that achieves automatic peeling and feeding in one continuous motion. Its industrial-grade intelligent design supports fast feeding speed with adjustable parameters, allowing operators to tune feed behavior to match each material’s peel characteristics. The feeder offers both online mode and automatic mode, giving users flexibility to integrate it into automated equipment chains or run it as a standalone station. A color touchscreen provides straightforward parameter display and setup, while GPIO and RS232 communication options ensure compatibility with various host systems.
For automotive electronics manufacturers, the feeder’s ability to handle diverse roll materials through a single intelligent platform reduces equipment variety and simplifies line planning. Anomaly alarm output and remote reset support minimize downtime when irregularities arise, keeping production flowing during long shift schedules. By combining strong material compatibility, configurable feeding parameters, and accessible communication interfaces, Yinuo Intelligent Short Front Pushing Feeder serves as a highly practical feeding solution that raises automation maturity on automotive electronics production lines.
仕様
| アイテム | 仕様 | Parameter | 仕様 |
| 給餌方法 | Peel tape onto receiving platform, then pick up | Operation Interface | 3.5″ TFT color screen, 480×320 resolution, capacitive touchscreen |
| Material Type | テープ・オン・リール | 供給速度 | 無段階速度制御、最大100mm/s |
| 電圧 | DC 24.0V | 待機電力 | <20W |
| 現在 | 最大5.0A | Operating Temperature | -20°C ～ 65°C |
| 給餌精度 | ±0.2mm | 動作湿度 | 20% ～ 90% RH、結露なし |
| Material Position Adjustment | X方向：機械的限界値の調整；; Y方向：ソフトウェアによる調整；; Z方向：機械式調整 |
保管温度 | -40°C～85°C |
| 吸気圧力 | 0.40MPa～0.60MPa | 保管時の湿度 | 10% から 95% へ |
| 通信インターフェース | GPIOのNPN/PNPタイプ | 寿命 | 20,000時間以上（25°C） |
| Program Interface | GPIO 232、TCP/IP | 寸法 | 実際の製品仕様をご参照ください |
| 駆動方式 | モーター＋空圧 | 重さ | 実際の製品仕様をご参照ください |
https://www.youtube.com/@allaismt
For more information about the Yinuo Intelligent Short Front Pushing Feeder, 、メールをお送りください
お問い合わせには速やかに対応し、弊社製品およびサービスに関する詳しい情報を提供させていただきます。.
