Pick Return Automation Yinuo Automatic Tray Feeder Shuttle Driven Tray Magazine

소개

그만큼 Yinuo 자동 트레이 공급기 divides its internal workspace into two distinct magazine zones — incoming and outgoing — linked by a shuttle-driven corridor. All trays entering the system originate from the incoming magazine, where multiple populated trays are stacked in dedicated slots, each carrying a full set of tray-packaged components awaiting placement. When the system calls for a fresh tray, the shuttle extracts one from this stack and carries it along the transport corridor to the pickup station.

At the pickup station, the tray is positioned on a rigid reference surface. The shuttle disengages and retreats, leaving the tray stationary under the placement head. Because the shuttle operates on a separate motion path from the pickup zone, its subsequent movements — returning to standby, pre-positioning for the next fetch — generate no mechanical disturbance at the tray surface. The nozzle array picks components from a completely still target, pocket by pocket, until the tray is fully depleted.

The outgoing magazine on the opposite side receives every empty tray. After the shuttle collects a spent tray from the pickup station, it routes it to the outgoing magazine and deposits it into the next vacant slot. This physical separation between incoming and outgoing magazines prevents any mix-up between full and empty trays and allows operators to swap magazines independently — a full incoming stack can be replenished while the outgoing stack is cleared, all without pausing the feed cycle. The result is a self-organizing tray logistics loop that keeps component supply and waste recovery running in parallel.

Yinuo 자동 트레이 공급기

Automatic Tray Feeder Shuttle Transport Dual Magazine Load Pickup Return Component Handling System

The tray feeder operates on a three-station shuttle loop: incoming tray magazine, pickup station, and empty tray magazine. A motor-driven carrier shuttle travels along a linear guide path connecting these stations. When the placement program calls for a tray, the shuttle advances to the loaded magazine, grips a populated tray, and transfers it to the pickup station. The shuttle then disengages and withdraws, leaving the tray stationary on the pickup platform. The SMT placement machine nozzle array descends onto the tray surface, retrieving tray-packaged components — ICs, QFPs, BGAs, connectors, and modules — directly from their pockets. The tray remains locked against mechanical stops throughout the entire depletion sequence, presenting a stable, repeatable pickup plane for every nozzle descent.

After the last component is lifted, the shuttle re-engages and transports the empty tray to the return magazine. The spent tray slides into the next available slot, stacking with previously returned carriers. The shuttle then loops back to the loaded magazine to fetch the next populated tray. This continuous load-pick-return rhythm runs without operator intervention between tray changes.

The dual-magazine layout keeps incoming and outgoing trays physically separated, preventing any mix-up between full and empty carriers. The shuttle motion path is independent of the pickup station, so shuttle travel does not transmit vibration into the tray during component retrieval. Feeder frame dimensions and tray pocket geometries are specified to match the host placement machine and the target component outlines, ensuring accurate tray-to-nozzle alignment across production runs.

매개변수

https://www.youtube.com/@allaismt

For more information about the Yinuo 자동 트레이 공급기, 자세한 내용은 이메일을 보내주세요.

info@allaismt.com

문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.