자동 벨트 공급 장치 ‘젠틀 피드’를 통해 조립 품질이 향상됩니다

소개

The versatility of the 자동 벨트 공급기 comes from its orientation guide system, an adjustable structure that accepts components with many different pin counts and body sizes. Guide surfaces and track width are set to the component’s geometry, so parts of different shapes travel along the same feed path in the same disciplined alignment. Because the adjustment is mechanical rather than component-specific, one feeder handles a wide range of multi-pin parts, such as connectors and headers, without dedicated tooling or separate feeding hardware.

The guide system works together with the selection track to do its job. As components pass through, the track verifies orientation, returning NG parts to the belt for another pass, while correctly oriented parts continue through the guides toward the transfer section. The universal design means the selection principle stays identical for every component: the geometry changes, but the logic does not. This is why a single feeder model can serve many part numbers on the line, replacing several dedicated feeders with one piece of equipment.

Adjustability also keeps the feeder compact. The guide system is built into the feeding unit, so there is no extra hardware outside the machine and no additional floor space required; a small feeder with a universal guide section does the work of multiple specialized machines. Combined with the quick-change unit, the same feeder switches between components in moments and keeps running quietly throughout. Versatility, small size, fast changeover, and quiet operation are therefore not separate features; they all come from the same simple, adjustable mechanism.

자동 벨트 공급기

Belt Feeder Steady Gentle Supply Strengthens LED Module Reliability

LED components are small, lightweight and easily damaged; a bent lead or cracked die can silently degrade a finished module. The 자동 벨트 공급기 protects them through its feeding principle. Bulk parts travel into the selection track, which filters by geometry and lets only correctly oriented components pass. Mis-oriented pieces are returned through the belt path and cycle through again, so every part reaches the placement machine the right way without being forced or dropped.

Once selected, components are carried back along the belt and handed to a linear vibrator, which delivers them to the pick-up position with short, controlled movements. The position is stable and repeatable, so the placement machine’s nozzle finds every part at exactly the same point, cycle after cycle. Belt and vibration replace impact-based mechanisms entirely, which both reduces the shock loads that can damage delicate LED parts and keeps operating noise low across the whole feeding cycle. Even the smallest chips travel as gently at the end of the process as they did at the start.

Because component condition directly affects LED brightness, color consistency and long-term reliability, gentler feeding translates directly into higher yield. Fewer damaged parts, fewer jams and fewer mis-picks mean less rework, fewer rejected modules and a steadier production rhythm. The Automatic Belt Feeder turns bulk handling, traditionally the roughest step in the process, into a controlled, repeatable one, giving LED manufacturers confidence that what enters the line in bulk leaves it as a dependable, intact stream of parts ready for the placement nozzle.

명세서

https://www.youtube.com/@allaismt

For more information about the 자동 벨트 공급기, 자세한 내용은 이메일을 보내주세요.

info@allaismt.com

문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.