소개
~ 안에 smart home device manufacturing, PCB terminal connectors carry Wi-Fi modules, power relays, sensor interfaces, and control logic across a wide variety of board layouts. The THT Automatic Terminal Insertion Machine provides sub-millimeter placement accuracy and programmable insertion force, ensuring every terminal is seated securely across high-mix production batches. Servo-driven heads with real-time force-feedback monitor each insertion event, intercepting misaligned or defective terminals before they advance downstream. This closed-loop verification makes the machine well-suited for smart home PCB assembly lines that must deliver consistent quality across multiple device platforms.
그만큼 THT Automatic Terminal Insertion Machine accommodates a broad range of PCB terminal connector geometries — including dual-row housings, right-angle terminals, and fine-pitch multi-pin configurations — without requiring tooling changeover. Vision-assisted alignment and intelligent feed architecture enable rapid program switching between smart home product variants, minimizing downtime on mixed-model lines. The machine applies calibrated force profiles tailored to each terminal specification, maintaining precise contact geometry and mechanical retention even under the compact board layouts typical of smart home electronics.
From a market perspective, the THT Automatic Terminal Insertion Machine enables smart home device factories to scale output without proportional headcount growth. Reduced scrap rates, lower rework labor, and process data logging that supports quality audits translate into measurable total cost of ownership advantages. As smart home product lifecycles shorten and model diversity increases, the machine’s flexibility and throughput velocity provide electronics manufacturers with a durable competitive edge in a fast-moving consumer electronics segment.
THT Automatic Terminal Insertion Machine
How the THT Automatic Terminal Insertion Machine Is Applied in Consumer Electronics Factories
Consumer electronics factories rely on PCB terminal connectors to carry power, signal, and control functions across smart home devices, household appliances, and entertainment electronics. The THT Automatic Terminal Insertion Machine applies servo-controlled insertion with programmable force profiles, seating each terminal with repeatable precision across high-mix production batches. Real-time force-feedback monitors every insertion event, intercepting misaligned or defective terminals before they progress downstream. This capability is particularly valuable in consumer electronics, where compact board layouts and diverse connector types demand consistent placement accuracy that manual processes cannot sustain at scale.
The THT Automatic Terminal Insertion Machine accommodates dual-row housings, right-angle terminals, and fine-pitch multi-pin configurations through an intelligent feed and positioning architecture that requires no tooling changeover. Vision-assisted alignment and rapid program switching minimize downtime across mixed-model lines, allowing consumer electronics factories to respond quickly to demand fluctuations across product families. The machine’s compact footprint also supports retrofitting into existing assembly lines with limited floor space, providing a practical automation path for factories transitioning from manual terminal insertion workflows.
Market value is realized through the THT Automatic Terminal Insertion Machine‘s ability to decouple production capacity from headcount growth. Consumer electronics manufacturers adopting the machine achieve measurable reductions in scrap rates, rework labor, and defect-related costs, while process data logging satisfies OEM quality audit requirements without additional overhead. As smart home and appliance product lifecycles shorten and model diversity increases, the machine’s throughput velocity and production agility provide electronics factories with a durable competitive advantage in a fast-moving, cost-sensitive market segment.
PCB Tab Terminals
명세서
| 모델 | YT-8000 |
| Equipment Size | 1700mm*1300mm*1600mm (2 heads) |
| Packaging | Tape terminal, bulk terminal |
| Equipment Weight | 1200KG |
| PCB 크기 | 380mm*280mmm (enlarged size can be customized) |
| Number of Insertion Heads | 1-4 Optional |
| Terminal Thickness | ≥0.5mm ≤1.2mm |
| Vertical Error | ≤0.8° |
| PCB Requirements | The insertion hole is 0.5±0.1mm larger than the component foot |
| Insertion Angle | 360°( increment 1°) |
| Body Distance | The distance between the components ≥ 2mm |
| Clinch | Inward clinching/Outward clinching/”N” |
| Humidity | 30%-70% |
| Display System | 17-inch color LCD monitor |
| 공급 시스템 | Tape feeder or Bowl feeder + feeding guide |
| Motion Accuracy | 0.001mm/pulse |
| Motion System | Panasonic controller, motor |
| Programming Function | Online visual programming, visual correction, EXCEL |
| Data Import | USB interface import, manual entry |
| Communication Interface | RS-232C (can be connected to MES system) |
| 힘 | Single 220V/AC, 50/60HZ, 2KVA |
https://www.youtube.com/@allaismt
For more information about the THT Automatic Terminal Insertion Machine, 자세한 내용은 이메일을 보내주세요.
문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.
