Wstęp
W smart home device manufacturing, PCB terminal connectors carry Wi-Fi modules, power relays, sensor interfaces, and control logic across a wide variety of board layouts. The THT Automatic Terminal Insertion Machine provides sub-millimeter placement accuracy and programmable insertion force, ensuring every terminal is seated securely across high-mix production batches. Servo-driven heads with real-time force-feedback monitor each insertion event, intercepting misaligned or defective terminals before they advance downstream. This closed-loop verification makes the machine well-suited for smart home PCB assembly lines that must deliver consistent quality across multiple device platforms.
Ten THT – automatyczna maszyna do osadzania końcówek accommodates a broad range of PCB terminal connector geometries — including dual-row housings, right-angle terminals, and fine-pitch multi-pin configurations — without requiring tooling changeover. Vision-assisted alignment and intelligent feed architecture enable rapid program switching between smart home product variants, minimizing downtime on mixed-model lines. The machine applies calibrated force profiles tailored to each terminal specification, maintaining precise contact geometry and mechanical retention even under the compact board layouts typical of smart home electronics.
From a market perspective, the THT Automatic Terminal Insertion Machine enables smart home device factories to scale output without proportional headcount growth. Reduced scrap rates, lower rework labor, and process data logging that supports quality audits translate into measurable total cost of ownership advantages. As smart home product lifecycles shorten and model diversity increases, the machine’s flexibility and throughput velocity provide electronics manufacturers with a durable competitive edge in a fast-moving consumer electronics segment.
THT – automatyczna maszyna do osadzania końcówek
How the THT Automatic Terminal Insertion Machine Is Applied in Consumer Electronics Factories
Consumer electronics factories rely on PCB terminal connectors to carry power, signal, and control functions across smart home devices, household appliances, and entertainment electronics. The THT Automatic Terminal Insertion Machine applies servo-controlled insertion with programmable force profiles, seating each terminal with repeatable precision across high-mix production batches. Real-time force-feedback monitors every insertion event, intercepting misaligned or defective terminals before they progress downstream. This capability is particularly valuable in consumer electronics, where compact board layouts and diverse connector types demand consistent placement accuracy that manual processes cannot sustain at scale.
The THT Automatic Terminal Insertion Machine accommodates dual-row housings, right-angle terminals, and fine-pitch multi-pin configurations through an intelligent feed and positioning architecture that requires no tooling changeover. Vision-assisted alignment and rapid program switching minimize downtime across mixed-model lines, allowing consumer electronics factories to respond quickly to demand fluctuations across product families. The machine’s compact footprint also supports retrofitting into existing assembly lines with limited floor space, providing a practical automation path for factories transitioning from manual terminal insertion workflows.
Market value is realized through the THT – automatyczna maszyna do osadzania końcówek‘s ability to decouple production capacity from headcount growth. Consumer electronics manufacturers adopting the machine achieve measurable reductions in scrap rates, rework labor, and defect-related costs, while process data logging satisfies OEM quality audit requirements without additional overhead. As smart home and appliance product lifecycles shorten and model diversity increases, the machine’s throughput velocity and production agility provide electronics factories with a durable competitive advantage in a fast-moving, cost-sensitive market segment.
Zaciski z wyprowadzeniami na płytce drukowanej
Specyfikacje
| Model | YT-8000 |
| Wymiary sprzętu | 1700 mm × 1300 mm × 1600 mm (2 głowice) |
| Opakowanie | Terminal taśmowy, terminal luzowy |
| Masa sprzętu | 1200 kg |
| Rozmiar PCB | 380 mm × 280 mm (możliwość dostosowania większych rozmiarów) |
| Liczba głowic wkładających | 1–4 Opcjonalne |
| Grubość końcówki | ≥0,5 mm ≤1,2 mm |
| Błąd pionowy | ≤0,8° |
| Wymagania dotyczące płytek drukowanych | Otwór montażowy jest o 0,5±0,1 mm większy od nóżki elementu |
| Kąt wstawiania | 360° (z krokiem co 1°) |
| Odległość od ciała | Odległość między elementami ≥ 2 mm |
| Clinch | Zaciskanie do wewnątrz/Zaciskanie na zewnątrz/”N” |
| Wilgotność | 30%-70% |
| System wyświetlania | 17-calowy kolorowy monitor LCD |
| System karmienia | Podajnik taśmowy lub podajnik misowy + prowadnica podająca |
| Dokładność ruchu | 0,001 mm/impuls |
| System ruchu | Sterownik i silnik firmy Panasonic |
| Funkcja programowania | Programowanie wizualne online, korekta wizualna, EXCEL |
| Import danych | Import danych przez interfejs USB, ręczne wprowadzanie danych |
| Interfejs komunikacyjny | RS-232C (możliwość podłączenia do systemu MES) |
| Moc | Pojedyncze 220 V/prąd przemienny, 50/60 Hz, 2 kVA |
https://www.youtube.com/@allaismt
For more information about the THT – automatyczna maszyna do osadzania końcówek, proszę wysłać e-mail na adres
Szybko odpowiemy na Twoje zapytanie i udzielimy Ci szczegółowych informacji o naszych produktach i usługach.
