Kembali ke halaman sebelumnya

Pengumpan Lembaran Timah Otomatis yang Fleksibel Dapat Mengolah Ukuran Potongan Apa Pun Melalui Pengaturan Resep

Description:Designed for automated SMT lines, the Pengumpan Lembaran Seng Otomatis turns coil stock into ready-to-place tin pieces at the point of use. It meters, cuts, and presents each piece automatically, so placement machines and robots take finished parts without any hand preparation. Feeding and cutting are engineered into a single machine, which removes a manual station from the line and makes the supply step deterministic: every piece arrives on time and to size, cycle after cycle. As a standard module, it integrates into new automation quickly, shortens design cycles, and raises the stability of the equipment it serves.

Jumlah Pesanan Minimum: 1 buah

Waktu Pengerjaan: 15 Hari

Perkenalan

Itu Pengumpan Lembaran Seng Otomatis is a complete machine on its own. It cuts, feeds, and meters tin automatically, with no auxiliary unit between the reel and the delivered piece. One machine performs three functions that once required separate steps: unwinding the coil, shearing the strip into pieces, and delivering each piece to a fixed exit point. Its independence is structural – every function is built into the frame, wired to one controller, and driven by one program. It needs nothing beyond power and a place to stand.

Continuous operation is the machine’s own affair. The unwind holds tension without supervision; the cut cycle repeats at the programmed rate; the exit port clears after each delivery, ready for the next piece. A small set of sensors supervises the loop: stock on the reel, strip present at the blade, piece delivered at the exit. When the reel approaches its end, the machine signals a low-stock condition and stops feeding at a preset threshold, so the operator is asked to act only at the moment of replenishment.

The payoff of self-sufficiency is that the feeder asks for attention only when it truly needs it. Between loadings, it holds its own cycle, its own quality, and its own rhythm, and the line downstream can plan against that steadiness instead of watching it. Parameters are stored per recipe and recalled on demand, so a changeover is a selection, not a rebuild: the operator calls up the product, and every feed distance, cycle speed, and cut timing returns exactly as set. A machine that runs its own loop is the practical definition of automatic feeding: the tin arrives cut, sized, and positioned.

 

Automatic Tin Sheet Feeder

Pengumpan Lembaran Seng Otomatis

 

Automatic Tin Sheet Feeder Serves Thermostats Smart Switches and Air Monitors

Thermostats, smart switch panels, and air-quality monitors are compact boards with demanding functional features: a thin heat path, a bridging element, a precisely sized contact piece. These are exactly the tin elements a factory used to prepare by hand. On the climate-control line, the Automatic Tin Sheet Feeder is used at the functional-feature station, turning coil stock into the exact pieces the board layout specifies. It works beside the placement machine as the dedicated source for these features, replacing hand preparation.

What the machine does there is mechanical precision. A servo advances the strip by programmed distance while the encoder verifies actual travel, and the shear cuts on a stopped strip, giving square, burr-free edges that place cleanly in tight layouts. Because the piece dimensions come from the recipe, the same feeder supplies heat paths for a thermostat, bridges for a switch panel, and contact elements for a monitor without any change of tooling. Products change several times a day, and the feeder follows without a pause.

The advantage is a security line that keeps its agility. Short runs stay economical because switching costs nothing, planners can sequence orders by delivery date instead of by tooling constraints, and new models reach the line as soon as their recipe is defined. That agility is engineered in: sizes live in software, one shear serves every variant, and changeover needs no blades or trial cuts. By making supply adaptable, the Pengumpan Lembaran Seng Otomatis lets the security line exploit variety instead of being limited by it. Delivery schedules, not changeover time, become the binding constraint.

 

 

Spesifikasi

Model YN-S2402 Keterangan
Dimensi (P×L×T) 878 × 55 × 233 mm
Berat 8,5 kg
Operating Voltage DC 42 V (1,5–2,5 A) Didukung oleh mesin penempatan
Kebutuhan Pasokan Udara 0,5–0,6 MPa Udara yang disuplai dari mesin pemasang
Operating Current Arus pengisian kurang dari 1,5 A
Feed Speed 0,6 detik per buah Waktu pemotongan ≥2 detik
Panel Operasi 0,96 inci TFT
Resolusi Layar Berwarna: 80×160 piksel
Panjang Pakan 2.2~18 mm Dapat disesuaikan, penyetelan halus ±0,1 mm
Ketebalan Tab Solder 0,05–0,3 mm Dapat disesuaikan, tidak dapat diatur
Lebar Tab Solder 2 × 12,1 mm Dapat disesuaikan, tidak dapat diatur
Bahan Tab Solder SnAg₃Cu₀,₅ Berpengaruh pada proses pemotongan dan pembentukan
Feed Method Dijepit Secara Mekanis

 

 

https://www.youtube.com/@allaismt

For more information about the Pengumpan Lembaran Seng Otomatis, silakan kirim email ke

info@allaismt.com

Kami akan segera menanggapi pertanyaan Anda dan memberikan informasi rinci tentang produk dan layanan kami.