At the delivery stage, a servo-driven cutter module shears the wire to a programmable length with clean, burr-free ends, then advances the cut segment into a vacuum-assisted pickup pocket. The cutter blade geometry is optimized for soft-copper and tinned-copper jumper alloys, producing a perpendicular cut that prevents stubbing or partial-severing issues that can jam downstream mechanisms. A wire-breakage sensor positioned between the spool and the straightener halts the feed sequence instantly if the reel runs out or the wire snaps, sending a digital fault signal to the placement machine before an empty pickup attempt occurs.<\/p>\n
These design choices translate directly into production reliability. The feeder turns what was traditionally a manual operation \u2014 cutting jumper wires to length and positioning them for pickup \u2014 into a fully automated sequence synchronized to the placement head’s cycle time. Wire length is held within tight tolerance from piece to piece, eliminating the variability of hand-cut jumpers. And because the system handles the full diameter range of standard jumper gauges without mechanical tooling changes, a single feeder unit covers the majority of wire-jumper applications on a typical SMT line.<\/p>\n
<\/p>\n
![\"Automatic](\"https:\/\/esmte.com\/wp-content\/uploads\/2026\/08\/Automatic-Jumper-Feeder.png\")
Alimentador autom\u00e1tico de jumpers<\/p><\/div>\n
<\/p>\n
Automatic Jumper Feeder for BMS and Inverter Module Assembly in New Energy Manufacturing<\/h2>\n
O Alimentador autom\u00e1tico de jumpers<\/strong> processes reel-fed jumper wire through an integrated unwind-straighten-cut-place sequence where every stage is actively controlled rather than passively guided. A programmable spool drive with torque feedback monitors and adjusts unwind force continuously, compensating for the decreasing spool diameter as wire is consumed and the corresponding change in rotational inertia. The wire feeds into a linear track equipped with tension-sensing pinch rollers that detect subtle variations in conductor surface friction and adjust grip pressure in response, preventing the slip that produces length errors on the finished jumper while avoiding the excessive clamping that mars the wire surface.<\/p>\n The cutting and delivery end of the feeder is purpose-built for the conductor types and end-use requirements specific to new energy electronics. The shear mechanism uses a double-acting blade set driven by a dedicated servo actuator controlling cutting speed and blade-dwell time, producing a perpendicular cut face with minimal burr formation on the copper alloys preferred for power-handling jumpers. After cutting, the jumper transfers into a pickup nest with a precision-machined channel that positions the wire segment for nozzle pickup \u2014 no reliance on gravity alone, no possibility of the jumper rolling out of alignment. An optical confirmation sensor at the nest verifies jumper presence and orientation, preventing pickup attempts on an empty or mispositioned nest.<\/p>\n The product advantage in new energy manufacturing is straightforward: the feeder replaces manual wire cutting and placement with a repeatable, synchronized process that produces jumpers of identical length and end quality at machine speed. Where BMS boards, inverter modules, and power distribution assemblies demand jumpers capable of carrying significant current, the Automatic Jumper Feeder supplies them from bulk stock without intermediate packaging steps. It eliminates the scrap generated by hand-cut length variations, reduces the handling contamination that degrades solder wetting on thick conductors, and turns what is often the last manual bottleneck on a high-power electronics line into an automated, self-regulating supply station.<\/p>\n <\/p>\n <\/p>\n <\/p>\n <\/p>\n <\/p>\n <\/p>\n![\"\"](\"https:\/\/esmte.com\/wp-content\/uploads\/2026\/08\/Jump-Wire-Roll-3.png\")
<\/p>\n<\/h2>\n
\u00a0 \u00a0 \u00a0 \u00a0
![\"\"](\"https:\/\/esmte.com\/wp-content\/uploads\/2026\/07\/\u80cc\u666f\u677f_\u526f\u672c_\u526f\u672c.png\")
\u00a0 \u00a0 \u00a0 \u00a0 ![\"\"](\"https:\/\/esmte.com\/wp-content\/uploads\/2026\/08\/Jump-Wire-3.png\")
<\/h2>\n<\/h2>\n
<\/h2>\n
Especifica\u00e7\u00f5es<\/h2>\n
\n\n
\n Modelo<\/strong><\/td>\n YN-J2303<\/strong><\/td>\n Observa\u00e7\u00f5es<\/strong><\/td>\n<\/tr>\n \n Dimens\u00f5es (C \u00d7 L \u00d7 A)<\/strong><\/td>\n 624 \u00d7 78 \u00d7 160 mm<\/strong><\/td>\n <\/td>\n<\/tr>\n \n Peso<\/td>\n 6,5 kg<\/td>\n <\/td>\n<\/tr>\n \n Operating Voltage<\/td>\n DC 24V<\/td>\n <\/td>\n<\/tr>\n \n Abastecimento de ar necess\u00e1rio<\/td>\n None<\/td>\n <\/td>\n<\/tr>\n \n Corrente m\u00e1xima<\/td>\n 2,5 A<\/td>\n <\/td>\n<\/tr>\n \n Feed Speed<\/td>\n 1,5 s\/unidade<\/td>\n <\/td>\n<\/tr>\n \n Painel de opera\u00e7\u00e3o<\/td>\n TFT de 0,96\u2033
\nResolu\u00e7\u00e3o da tela colorida: 80\u00d7160 pixels<\/td>\n<\/td>\n<\/tr>\n \n Tempo de troca<\/td>\n 3 min<\/td>\n <\/td>\n<\/tr>\n \n Canal<\/td>\n Canal \u00fanico<\/td>\n <\/td>\n<\/tr>\n \n Fun\u00e7\u00e3o de dobra de chumbo<\/td>\n Dobragem<\/td>\n <\/td>\n<\/tr>\n \n Fun\u00e7\u00e3o pr\u00e9-eleva\u00e7\u00e3o<\/td>\n Servi\u00e7o de transporte antes do evento dispon\u00edvel<\/td>\n <\/td>\n<\/tr>\n \n Fun\u00e7\u00e3o de corte<\/td>\n Limite<\/td>\n <\/td>\n<\/tr>\n \n Fun\u00e7\u00e3o de corre\u00e7\u00e3o<\/td>\n Corre\u00e7\u00e3o<\/td>\n <\/td>\n<\/tr>\n \n Di\u00e2metro do fio do material<\/td>\n 0,4\u20131 mm<\/td>\n N\u00e3o \u00e9 poss\u00edvel usar a matriz de conforma\u00e7\u00e3o de 0,6 mm para conformar um fio de 0,4 mm;
\nS\u00f3 \u00e9 poss\u00edvel usar uma matriz de 0,6 mm para fio de 0,6 mm<\/td>\n<\/tr>\n\n Espa\u00e7amento entre trilhos<\/td>\n 5\u201326 mm
\n(A matriz de conforma\u00e7\u00e3o depende do di\u00e2metro do fio)
\nMolde em forma de cruz: 3 tamanhos em um conjunto (grande\/m\u00e9dio\/pequeno)<\/td>\nN\u00e3o \u00e9 poss\u00edvel usar a matriz de conforma\u00e7\u00e3o de 16 mm para o passo de trilho de 16 mm;
\n\u00c9 necess\u00e1rio usar uma matriz de 16 mm de comprimento<\/td>\n<\/tr>\n\n Comprimento da ponta de conforma\u00e7\u00e3o<\/td>\n 2,0 a 5,5 mm<\/td>\n Dentro dessa faixa, s\u00f3 \u00e9 poss\u00edvel obter comprimentos diferentes
\nutilizando diferentes matrizes de conforma\u00e7\u00e3o de tamanhos correspondentes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n