{"id":25775,"date":"2026-06-29T16:49:51","date_gmt":"2026-06-29T08:49:51","guid":{"rendered":"https:\/\/esmte.com\/?post_type=product&p=25775"},"modified":"2026-06-29T16:49:51","modified_gmt":"2026-06-29T08:49:51","slug":"sheet-retracting-feeder","status":"publish","type":"product","link":"https:\/\/esmte.com\/pt\/products\/sheet-retracting-feeder\/","title":{"rendered":"New Energy Sheet Retracting Feeder Operator Friendly Feeding System"},"content":{"rendered":"

Introdu\u00e7\u00e3o<\/h2>\n

Materials that arrive as single-row or multi-row die-cut sheets \u2014 large-format, high-tack, or irregularly shaped \u2014 often fall outside the operating range of conventional feeders. Converting these materials into rolled formats adds cost and time, and for certain adhesive-backed or oversized sheets, the conversion itself may be impractical. The sheet retracting feeder accepts die-cut sheets in their supplied form, cutting out the conversion step and reducing material preparation expense.<\/p>\n

The core feeding action relies on blade retraction rather than forward peeling. The placement nozzle grips the sheet from above while the blade retracts beneath, pulling the carrier tape away from the material. This approach handles large sheets without flex-induced misalignment and manages high-tack adhesives without residue transfer to the blade. The retraction distance is set to exceed the sheet width, ensuring the entire material surface \u2014 including irregular or non-symmetric profiles \u2014 detaches cleanly in a single motion.<\/p>\n

The feeder delivers high throughput through an automated magazine-to-placement sequence: nozzle pickup, blade retraction, material lift, blade return, and carrier indexing. Multi-row magazine configurations support feeding different sheet geometries from one station, enhancing line flexibility without additional hardware. Material compatibility spans paper labels, protective films, foam, double-sided tape, conductive adhesive, copper foil, steel sheets, and stiffener plates. By accepting die-cut sheets directly and processing them in a continuous retraction cycle, the feeder offers a practical alternative for production environments where material diversity, large sheet dimensions, and adhesive complexity define the feeding challenge.<\/p>\n

 <\/p>\n

\"Sheet

Sheet Retracting Feeder<\/p><\/div>\n

 <\/p>\n

Using Sheet Retracting Feeders in New Energy Electronics Board Assembly<\/h2>\n

New energy electronics production \u2014 battery management controllers, inverter power stages, and onboard charger modules \u2014 routinely uses sheet-form materials such as thermal pads, insulation films, copper foil, and conductive adhesive sheets. These materials often arrive as die-cut sheets in single-row or multi-row formats, with large dimensions and high-tack adhesive backing. Converting them into rolled stock adds processing cost, extends lead time, and introduces handling stress that can compromise adhesive performance. For oversized sheets or those with aggressive bonding properties, roll conversion is frequently not viable at all.<\/p>\n

The sheet retracting feeder accepts die-cut sheets directly, removing the conversion step and its associated expense. The nozzle descends and secures the sheet via vacuum, then the peeling blade retracts in the opposite direction, pulling the carrier away while the material stays stationary. The retraction stroke exceeds the sheet width, ensuring complete detachment even for large-format sheets and high-bond adhesives. This inverse separation avoids tearing, curling, and residue transfer common with forward-peel mechanisms. Irregularly shaped sheets with cutouts or asymmetric edges also separate cleanly, since the blade retracts along a linear path independent of the material profile.<\/p>\n

Multi-row magazine configurations allow different sheet types to feed from one station, reducing equipment footprint and simplifying line layout. Programmable stroke, speed, and pitch settings enable quick adjustment between batches without mechanical changes. Interchangeable blade widths support material size changes at the feeder level rather than requiring dedicated feeder units for each format. Stacked magazine loading supports extended unattended operation, keeping throughput steady across shift changes. These capabilities suit the high-mix production typical of new energy manufacturing, where battery packs, inverters, and charging modules shift material requirements from batch to batch.<\/p>\n

 <\/p>\n

 <\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Par\u00e2metros<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/td>\nParameter<\/strong><\/td>\nItem<\/strong><\/td>\nParameter<\/strong><\/td>\n<\/tr>\n
M\u00e9todo de alimenta\u00e7\u00e3o<\/td>\nDescole sobre a plataforma antiaderente e, em seguida, pegue<\/td>\nPainel de opera\u00e7\u00e3o<\/td>\nTela sens\u00edvel ao toque TFT de 3,5 polegadas, 480\u00d7320 pixels, capacitiva<\/td>\n<\/tr>\n
Component Type<\/td>\nComponentes de tira
\n(\u00e9 necess\u00e1rio deixar um espa\u00e7o em branco nas duas extremidades)<\/td>\n		Velocidade de alimenta\u00e7\u00e3o<\/td>\nControle de velocidade cont\u00ednuo, m\u00e1x. 100 mm\/s<\/td>\n<\/tr>\n
Tens\u00e3o<\/td>\n24,0 V CC<\/td>\nPower Consumption<\/td>\n<20 W<\/td>\n<\/tr>\n
Atual<\/td>\n5,0 A M\u00c1X.<\/td>\nOperating Temperature<\/td>\n-20 a 65 \u00b0C<\/td>\n<\/tr>\n
Precis\u00e3o na alimenta\u00e7\u00e3o<\/td>\n\u00b10,5<\/td>\nUmidade de opera\u00e7\u00e3o<\/td>\n20~90%RH, sem condensa\u00e7\u00e3o<\/td>\n<\/tr>\n
Ajuste da posi\u00e7\u00e3o da alimenta\u00e7\u00e3o<\/td>\nX: ajuste do limite mec\u00e2nico;
\nY: ajuste de software;
\nZ: ajuste mec\u00e2nico<\/td>\n		Temperatura de armazenamento<\/td>\n-40 a 85 \u00b0C<\/td>\n<\/tr>\n
Especifica\u00e7\u00f5es de abastecimento de ar<\/td>\n0,40~0,60 MPa<\/td>\nUmidade de armazenamento<\/td>\n10~95%<\/td>\n<\/tr>\n
Interface de comunica\u00e7\u00e3o<\/td>\nTipo GPIO NPN\/PNP<\/td>\nVida \u00fatil<\/td>\n\u226520 mil horas (25 \u00b0C)<\/td>\n<\/tr>\n
Comunica\u00e7\u00e3o de hardware<\/td>\nGPIO, RS232, TCP\/IP<\/td>\nDimens\u00f5es<\/td>\nDe acordo com as especifica\u00e7\u00f5es do produto<\/td>\n<\/tr>\n
M\u00e9todo de acionamento<\/td>\nEl\u00e9trico + Pneum\u00e1tico<\/td>\nPeso<\/td>\nDe acordo com as especifica\u00e7\u00f5es do produto<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

\"\"<\/p>\n

 <\/p>\n

https:\/\/www.youtube.com\/@allaismt<\/u><\/a><\/p>\n

For more information about the Sheet Retracting Feeder<\/strong>, Por favor, envie um e-mail para<\/p>\n

info@allaismt.com<\/u><\/a><\/p>\n

Responderemos \u00e0 sua solicita\u00e7\u00e3o prontamente e forneceremos informa\u00e7\u00f5es detalhadas sobre nossos produtos e servi\u00e7os.<\/p>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

Descri\u00e7\u00e3o: O Sheet Retracting Feeder<\/strong> processes die-cut sheets directly from the magazine \u2014 no roll conversion required. A vacuum nozzle grips the sheet while the peeling blade retracts, pulling the carrier backward over a distance greater than the sheet width. This full-travel retraction detaches large-format, high-tack, and irregularly shaped materials cleanly, avoiding the tearing and residue issues of forward-peel systems. Direct sheet feeding cuts material preparation costs and eliminates the downtime of format conversion. Multi-row configurations feed different sheet types from one station. Interchangeable blades, programmable stroke and speed, and stacked magazine loading support high-mix, high-throughput production<\/p>\n

Quantidade m\u00ednima para encomenda: 1 unidade<\/p>\n

Prazo de entrega: 15 dias<\/p>","protected":false},"featured_media":25782,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"etheme_brands":[],"product_brand":[],"product_cat":[161,216],"product_tag":[],"class_list":["post-25775","product","type-product","status-publish","has-post-thumbnail","product_cat-smt-custom-feeder","product_cat-sheet-feeder","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product\/25775","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/comments?post=25775"}],"version-history":[{"count":3,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product\/25775\/revisions"}],"predecessor-version":[{"id":25785,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product\/25775\/revisions\/25785"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/media\/25782"}],"wp:attachment":[{"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/media?parent=25775"}],"wp:term":[{"taxonomy":"brand","embeddable":true,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/etheme_brands?post=25775"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product_brand?post=25775"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product_cat?post=25775"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/esmte.com\/pt\/wp-json\/wp\/v2\/product_tag?post=25775"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}