소개
그만큼 Automatic Tube Feeder serves as a critical interface between bulk component packaging and automated placement, converting tube-stored components into a controlled, single-file presentation ready for pick-and-place. Its servo-driven indexing aligns with the cadence of modern assembly lines, keeping components correctly oriented and available exactly when the placement head requires them. By replacing intermittent manual loading with continuous, regulated component part flow, it stabilizes the entire downstream placement process and protects sensitive semiconductor packages from handling damage during every single transfer cycle.
In production, the feeder addresses one of the most persistent bottlenecks in electronics manufacturing: inconsistent part feeding. By maintaining uniform component pitch and stable pickup coordinates, it reduces placement errors, prevents component bridging, and protects delicate package leads from mechanical stress—benefits that translate directly into higher first-pass yield and lower rework cost. Tight sensor feedback confirms component presence at each station, preventing empty picks and stopping irregular advances before they disrupt the placement cycle, so downstream operations run without interruption throughout long production shifts.
The equipment finds application across diverse manufacturing scenarios: mixed-technology PCB assembly combining SMT and through-hole, semiconductor final test and packaging operations, and automotive or industrial control board production where component variety is high. From telecommunications infrastructure boards to power management modules, the feeder supports reliable, repeatable delivery of tube-packaged devices in any environment prioritizing precision and uptime. Its flexibility suits both high-volume dedicated lines and high-mix contract environments, where frequent product changeovers demand fast, accurate component handling to maintain steady output and quality.
Automatic Tube Feeder
Automatic Tube Feeder Maximizes Placement Output with Unbroken Tube Packaged MOSFET Feed
그만큼 Automatic Tube Feeder provides an automated feeding method for MOSFETs supplied in protective tubes. In automotive electronics manufacturing, MOSFETs are frequently used as electronic switching elements in power-management and control circuits. When these MOSFETs are packaged in tubes, the Automatic Tube Feeder transfers them one by one from the tube toward the pickup point. The feeding mechanism controls the movement of the components so that the placement machine can access individual MOSFETs in the required sequence. This makes the feeder a dedicated interface between tube-packaged MOSFETs and automated component placement.
The application is particularly relevant to automotive PCBs where MOSFETs perform switching functions. In a battery management system, MOSFETs can control current paths during battery charging, discharging, and protection operations. In an electric vehicle motor-control board, MOSFETs can function as switching devices within the power stage. In power conversion circuits, MOSFETs can provide controlled switching for energy conversion. For these applications, the Automatic Tube Feeder delivers the required MOSFETs directly to the placement head, allowing each component to be positioned according to the PCB assembly program and its designated circuit location.
The feeding process is based on sequential component presentation. After a MOSFET is picked by the placement head, the feeder advances the next device from the tube into the pickup area. This prevents the operator from having to manually remove and position individual MOSFETs during placement. The feeder can therefore be assigned to specific MOSFET part numbers used on an automotive PCB, with its feeding position corresponding to the component requirements programmed in the placement machine. The Automatic Tube Feeder is consequently suited to automated placement of tube-packaged MOSFETs where controlled component presentation is required.
명세서
| 모델 | YN-T2112 (단선) | YN-T2112H (컷오프 기능이 있는 싱글 트랙) | YN-T2109 (듀얼 트랙) |
| 치수 (길이×너비×높이) | 1500×76×1140mm | 1500×76×1140mm | 1500×90×1140mm |
| 무게 | 35kg | 95kg | 40KG |
| Operating Voltage | AC 220V | ||
| 공기 공급 필요 | 0.5–0.7MPa | ||
| 최대 전류 | 2A | ||
| Feed Speed | <2초/개 | ||
| 조작 패널 | 1.54인치 OLED 디스플레이 화면 | ||
| 채널 전환 시간 | <6초 | ||
| 채널 | 단일 채널 （단일/이중 채널 선택 가능） |
단일 채널 （단일/이중 채널 선택 가능） |
듀얼 채널 （단일/이중 채널 선택 가능） |
| 납 굽힘 기능 | 선택 사항（기본값: 없음） | ||
| 형성 기능 | 선택 사항（기본값: 없음） | ||
| 리프트 전 기능 | 선택 사항（기본값: 없음） | ||
| 컷오프 함수 | 선택 사항（기본값: 없음） | 네 | 선택 사항（기본값: 없음） |
| 최대 길이 | 선택 사항（기본값: 없음） | 재료 사양에 따라 맞춤 제작 가능 | 선택 사항（기본값: 없음） |
| 컷오프 피치 | 선택 사항（기본값: 없음） | ±1mm（조절할 수 있는） | 선택 사항（기본값: 없음） |
| 적용 가능한 튜브 길이 | 400–600mm | 400–600mm | 400–600mm |
| 적용 가능한 튜브 높이 | 10mm–45mm | 10mm–45mm | 10mm–45mm |
| 적용 가능한 튜브 폭 | 10mm–40mm | 10mm–40mm | 10mm–28mm |
https://www.youtube.com/@allaismt
For more information about the Automatic Tube Feeder, 자세한 내용은 이메일을 보내주세요.
문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.
