Preforms Cut Burr-Free While Feeding Continues, Automatic Tin Sheet Feeder

소개

Every shielding layer, grounding contact, and heat-spreading structure on a PCB begins as tin, and the Automatic Tin Sheet Feeder is where that material becomes a production supply. Coiled tin strip or tin wire leaves the feeder in measured deliveries for pick-and-place machines, labeling systems, and other specialized SMT equipment, which attach each sheet to the PCB as shielding, grounding, thermal, or conductive structure. Boards that once required dedicated manual stations for such features are now produced on the standard line — SMT output becomes diverse and functional without changing the equipment base.

Module-scale performance demands fine tolerance and clean handling, and the feeder delivers both through the way it works. Servo-indexed metering holds every delivery at the exact pitch the module placement head expects, while contact-free transport and anti-static rollers protect delicate tin features and densely populated boards from contamination and micro-damage. The layered anti-adhesion system clears the oiled, coated stock common in power electronics without double-feeding, and the cutting module prepares preforms and wire segments on demand, synchronized so cutting never interrupts the feed cycle.

Coiled tin strip and tin wire enter the machine and leave as measured, single-sheet deliveries for pick-and-place machines, labeling systems, and similar specialized SMT equipment, which mount each piece on the PCB as shielding, grounding, thermal, or conductive structure. Board features that previously required manual stations now arrive through the standard line, so SMT production turns diverse and functional without new capital equipment.

Automatic Tin Sheet Feeder

Automatic Tin Sheet Feeder Supplies Tin Features for Inverters and Battery Systems

New energy electronics are assembled through a chain of material handoffs: from coil to placement, from placement to line, from line to cutting, from cutting to robot. The Automatic Tin Sheet Feeder is the machine at every link of that chain. At the first link, it hands tin to the board-builders: pick-and-place machines, labeling systems, and other specialized SMT equipment receive metered sheets from the coil and attach them to the boards behind inverters, on-board chargers, and battery systems — as shields around power circuits, heat paths for high-current components, and grounding features. Feeding is a machine’s job, so the line runs diversified, functional products without a manual station.

At the middle links, the same machine carries the material across the automated line and through the cutting stage. Mounted as a standard module, it takes material handling out of the list of things engineers must design — shortening the automation design cycle and raising the stability of the line it serves. The servo-driven cutting module severs sheet and wire into preset, burr-free lengths as production requires and passes them forward without stopping the feed; encoder feedback closes the loop on pitch and cut length, and real-time sensors watch every material state. Cutting and feeding share one synchronized drive, so the link never breaks.

At the final link, the handoff goes to a robot. Every sheet and segment is staged for the gripper, presented undistorted by multi-point vacuum pickup, so the arm places without searching and the cell runs without an operator — material flows from coil to robot by itself. The rigid steel frame, precision-ground rails, and hardened rollers carry the chain through millions of cycles and three shifts a day, while tool-free changeover with stored recipes reconfigures it for the next product in minutes. With the Automatic Tin Sheet Feeder at every link, the chain runs complete and automatic — a feed path with no hand in it.

명세서

https://www.youtube.com/@allaismt

For more information about the Automatic Tin Sheet Feeder, 자세한 내용은 이메일을 보내주세요.

info@allaismt.com

문의하신 내용에 신속하게 답변드리고 당사 제품 및 서비스에 대한 자세한 정보를 제공해 드리겠습니다.