導入
Mini Sheet Feeder addresses the need for feeding small sheet labels in assembly environments where feeder space is tight. The unit takes up a minimal footprint in the feeder slot array, allowing production lines to run small-format labels without sacrificing positions needed for tape, tray, or stick feeders. The feeder moves each label sheet forward to the pickup coordinate, presenting it flat and centered for nozzle pickup. This straightforward feed action is suitable for thin adhesive labels, product identification tags, and compliance marking sheets that arrive as pre-cut arrays rather than reel-packed formats.
The unit is built around a compact structure that fits into narrow feeder positions that full-size sheet units cannot occupy. This space-saving design helps factories expand their label feeding options within existing line configurations, particularly on lines producing compact devices where feeder density is high. Setup parameters include label width, feed step length, and nozzle access timing, all adjustable through the operator interface and savable per recipe. When the line switches between label types or product models, the stored recipe loads the correct settings without manual recalibration, reducing changeover time for small-batch and mixed-model schedules.
In consumer electronics, automotive modules, smart appliance manufacturing, and telecommunications assembly, the feeder handles QR code labels, traceability stickers, rating plates, caution tags, and small insulation patches. The compact frame and direct feed mechanism support reliable label presentation without the holding structures required by larger sheet materials. The Mini Sheet Feeder conforms to established electronics equipment norms and can be installed in standard feeder positions, giving production teams a space-efficient way to automate small label placement alongside existing feeder configurations.
Mini Sheet Feeder
Operating Mini Sheet Feeder on Electronics Factory Assembly Lines
Electronics factories increasingly handle small-format sheet labels across multiple product lines, from consumer devices to automotive control modules. Mini Sheet Feeder processes label dimensions below the capacity of standard sheet feeders, covering pre-cut adhesive tags, kiss-cut label sheets, and array-cut identification stickers that arrive as loose sheets rather than reel-packed supplies. This coverage range bridges the space between reel-fed label feeders and full-size sheet feeding units. The straightforward advance mechanism keeps each label steady through the transport cycle without complex holding structures, making the unit lightweight and quick to set up.
The mini frame occupies a reduced feeder slot footprint, enabling factories to add label feeding capability without extending the line or removing existing feeder stations. On lines producing smartphones, smart home controllers, or automotive sensor modules, the Mini Sheet Feeder runs small labels alongside tape-fed components and tray-fed ICs within the same segment. Operators configure feed step, label pitch, and pickup alignment through the control interface, with named recipe storage for repeated production runs. The open feed path supports quick loading and visual verification of label alignment, helping operators respond to format changes without extended downtime or trial adjustments. The unit processes single labels and multi-label arrays arranged in row-column patterns.
For electronics factory applications across consumer devices, automotive modules, power electronics, and LED products, the feeder handles serial number labels for product tracking, QR code tags for scanning stations, warning stickers for safety compliance, brand patches for visual identification, and small insulation labels for circuit protection. The direct advance mechanism keeps each label steady through the feed cycle and presents it for nozzle pickup without additional holding steps, reducing the gap between label supply and final placement on the board. The unit conforms to prevailing electronics platform standards and adapts to lines with varying production volumes and tight feeder space constraints.
Parameters
| アイテム | Parameter | アイテム | Parameter |
| Feeding Method | Peel onto anti-adhesion platform, then pick | Operation Panel | 3.5″ TFT touchscreen, 480×320 pixels, capacitive |
| Component Type | Strip components (blank area required at both ends) |
Feeding Speed | Stepless speed control, max 100mm/s |
| 電圧 | DC 24.0V | Power Consumption | <20W |
| Current | 5.0A MAX | Operating Temperature | -20~65°C |
| Feeding Accuracy | ±0.5 | Operating Humidity | 20~90%RH, non-condensing |
| Feed Position Adjustment | X: mechanical limit adjustment; Y: software adjustment; Z: mechanical adjustment |
Storage Temperature | -40~85°C |
| Air Supply Spec | 0.40~0.60 MPa | Storage Humidity | 10~95% |
| Communication Interface | GPIO NPN/PNP type | 耐用年数 | ≥20K hrs. (25°C) |
| Hardware Communication | GPIO, RS232, TCP/IP | 寸法 | Per product specification |
| Drive Method | Electric + Pneumatic | 重さ | Per product specification |
https://www.youtube.com/@allaismt
For more information about the Mini Sheet Feeder, 、メールをお送りください
お問い合わせには速やかに対応し、弊社製品およびサービスに関する詳しい情報を提供させていただきます。.
