導入
Guided by a dedicated transport raceway, empty carrier tape progresses into the loading zone of the Yinuo Automatic Tape Feeder, where a placement unit positions components into each formed cavity. The ratchet drive mechanism then indexes the tape forward at controlled pitch increments, moving loaded pockets sequentially toward the sealing stage while maintaining positional repeatability throughout the transport path.
At the sealing section, a cover film is applied across the carrier tape and bonded through either cold lamination or heat fusion. The Yinuo Automatic Tape Feeder allows selection between these two methods, adapting to the specific cover tape material and the peel-force characteristics required for downstream feeder dispensing. This adaptability supports a wide range of packaging specifications without hardware changes.
After the film is sealed, a motor-driven winding unit collects the finished carrier tape onto take-up reels for SMT assembly use. Industries benefiting from the Yinuo Automatic Tape Feeder include packaging, 3C, FPC, and electronics manufacturing. Material compatibility spans metal stiffeners, steel sheets, insulation inserts, and various electronic components. The feeder combines efficient throughput with strong format versatility, reducing setup time in high-mix production environments.
Yinuo Automatic Tape Feeder
SMT Tape Feeder Electronics Production Line Component Packaging Application
On the factory floor, the Yinuo Automatic Tape Feeder operates as part of the pre-SMT material preparation workflow. At the start of a shift, an operator loads empty carrier tape into the feeder and sets the placement parameters for the scheduled batch. Components are fed into the loading zone, where they drop into carrier pockets at production pace. The operator monitors the process from a central station, intervening only for material replenishment or batch transitions.
Downstream, the populated tape passes through the cover film application stage. Depending on the batch specification, the factory runs either cold-seal or heat-seal mode. The sealed tape emerges as a finished reel, collected by the motor-driven take-up unit. A line-side handler removes the completed reel and stages it for the SMT placement area. Within minutes, that reel is mounted on a pick-and-place feeder and actively dispensing components onto PCBs moving through the assembly line.
Industries using this workflow include packaging, 3C electronics, FPC fabrication, and broader electronics assembly. The feeder handles metal stiffeners, steel sheets, insulation films, and various electronic components. Across a production day, the feeder’s steady reel output feeds multiple SMT lines. When the batch changes, operators swap carrier tape, update the cover film roll, and reload components — a transition that keeps the packaging station synchronized with the placement floor’s real-time demand.
テープ・リールフィーダー
パラメータ
| アイテム | Parameter | アイテム | Parameter |
| 給餌方法 | 摘んでから切る | 供給速度 | 無段階速度制御、最大100mm/s |
| Component Type | ロール状の素材 | 供給速度 | 無段階速度制御、最大100mm/s |
| 電圧 | DC 24.0V | 待機電力 | <20W |
| 現在 | 最大5.0A | Operating Temperature | -20～65°C |
| 給餌精度 | ±0.2 | 動作湿度 | 20～90%RH、結露なし |
| フィード位置の調整 | X：機械的限界の調整；; Y：ソフトウェア調整；; Z：機械的な調整 |
保管温度 | -40～85°C |
| エア・サプライの仕様 | 0.40～0.60 MPa | 保管時の湿度 | 10~95% |
| 通信インターフェース | GPIOのNPN/PNPタイプ | 耐用年数 | 20,000時間以上（25°C） |
| ハードウェア通信 | GPIO、RS232、TCP/IP | 寸法 | 製品仕様書に基づき |
https://www.youtube.com/@allaismt
For more information about the Yinuo Automatic Tape Feeder, 、メールをお送りください
お問い合わせには速やかに対応し、弊社製品およびサービスに関する詳しい情報を提供させていただきます。.
