導入
その Yinuo Automatic Cutting Feeder pulls continuous material from a roll, advances it through a servo-controlled transport mechanism, and executes a programmable blade stroke that yields precisely detached sheet pieces. Protective films, foam cushions, conductive adhesives, copper foils, and reinforcing steel strips in roll format are processed through this automated blade-separation cycle, replacing manual cutting and indexing. The blade assembly adjusts for varying material rigidity and thickness, ensuring clean separation across diverse material families used in automotive control units, telecom base station assemblies, LED lighting modules, and renewable energy power electronics.
Flexible protective films and rigid steel reinforcing strips are handled on the same platform, with blade parameters independently adjustable for each material category. A wide range of roll widths is supported, covering diverse application scenarios. Each material specification can be saved as a recipe, enabling operators to recall optimized cutting parameters during line changeovers without repeated trial-and-error configuration. This approach reduces setup downtime and maintains cut quality across different production runs, which proves especially valuable in facilities managing multiple material types on a shared production line.
The cutting blade is replaceable in the field, so factories handling multiple roll specifications need only swap blades rather than invest in separate feeder units. The equipment’s mounting footprint adheres to prevailing SMT platform standards, facilitating deployment on existing assembly lines without custom adapters. A clear viewing port along the material transport path provides real-time alignment verification, and the control interface presents recipe selection and parameter adjustment in a layered menu structure that minimizes training overhead. Yinuo Electronics built this feeder to suit facilities where material diversity, frequent changeovers, and floor space constraints shape equipment selection decisions.
Yinuo Automatic Cutting Feeder
Yinuo Automatic Cutting Feeder PE Film Roll Separation Home Appliance Manufacturing Supply
The Yinuo Automatic Cutting Feeder converts PE protective film from continuous rolls into precisely separated sheet pieces through a servo-driven feed channel and programmable blade stroke. In refrigerator production, PE films are applied to stainless steel door panels and side plates after stamping to prevent surface marring during foaming, assembly, and transit. The feeder draws roll-form PE film, advances each segment to a defined cut position, and severs it into sheets sized to match specific door panel dimensions. Cut depth and stroke length are operator-configurable, allowing the same platform to process films for single-door, double-door, and side-by-side refrigerator models without mechanical retooling.
Washing machine manufacturing presents a different set of protection requirements. PE film sheets shield control consoles, drum access doors, and top covers during screwdriving, snap-fitting, and leak-testing operations on the assembly line. Blade pressure and feed speed are independently tunable to match each film grade’s tensile and adhesive properties, preventing edge tearing or adhesive residue transfer on polished surfaces. Recipe-driven parameter storage enables a production line to switch from refrigerator film specifications to washing machine film specifications with instant recall of stored cut parameters, minimizing idle time between product families.
Beyond refrigerators and washing machines, the feeder handles PE films for microwave oven facades, air conditioner louver panels, and dishwasher front panels. Each appliance type requires distinct sheet dimensions and film grades—transparent low-tack films for glossy enamel finishes, opaque variants for brushed metal textures. The cutting blade is field-replaceable, allowing appliance factories to switch between film widths and cut lengths for different models without procuring additional feeder units. A compact mounting footprint conforms to prevailing automated assembly platform standards, and a transparent inspection window provides visual confirmation of film alignment before each cutting cycle.
仕様
| アイテム | 仕様 | アイテム | 仕様 |
| Feeding Method | Pick then cut | Operation Panel | 3.5″ TFT color screen, 480×320 pixels, capacitive |
| Component Type | Roll-type material | Feeding Speed | Stepless speed control, max 100mm/s |
| 電圧 | DC 24.0V | Standby Power | <20W |
| Current | 5.0A MAX | Operating Temperature | -20~65°C |
| Feeding Accuracy | ±0.2 | Operating Humidity | 20~90%RH, non-condensing |
| Feed Position Adjustment | X: mechanical limit adjustment; Y: software adjustment; Z: mechanical adjustment |
Storage Temperature | -40~85°C |
| Air Supply Spec | 0.40~0.60 MPa | Storage Humidity | 10~95% |
| Communication Interface | GPIO NPN/PNP type | 耐用年数 | ≥20K hrs. (25°C) |
| Hardware Communication | GPIO, RS232, TCP/IP | 寸法 | Per product specification |
https://www.youtube.com/@allaismt
For more information about the Yinuo Automatic Cutting Feeder, 、メールをお送りください
お問い合わせには速やかに対応し、弊社製品およびサービスに関する詳しい情報を提供させていただきます。.
