導入
The 3C electronics sector covers a broad range of products including smartphones, tablets, laptops, wearables, and smart home devices. These products share a common production challenge: high component density, frequent model changes, and tight quality requirements. The Yinuo Retracting Feeder is purpose-built to support this environment, offering a reliable feeding solution that adapts to the rapid product cycles typical of 3C manufacturing.
In smartphone and laptop assembly lines, the feeder handles reels of micro passive components and small ICs used in dense PCB layouts. For wearables and IoT devices, where production volumes are smaller but changeovers are frequent, the unit’s quick adjustment features allow fast switching between part numbers. Across all applications, the enclosed tape path helps protect sensitive components from dust and static discharge, supporting consistent assembly quality.
3C manufacturers operating under just-in-time and lean production models benefit from the predictability the Yinuo Retracting Feeder brings to the SMT line. Its compatibility with widely used placement machines means it can be deployed across multiple facilities using different equipment generations. By focusing on the practical demands of 3C electronics production, the feeder serves as a dependable building block for factories aiming to balance flexibility, quality, and cost in a competitive market.
Yinuo Retracting Feeder
Yinuo Retracting Feeder in 3C Factory Operations
その Yinuo Retracting Feeder employs a retraction based feeding mechanism to deliver components to the pickup position in 3C electronics SMT assembly. Rather than advancing tape forward in a single continuous motion, the feeder draws the carrier tape backward in a controlled retraction stroke, exposing each component precisely at the pickup window. This approach keeps the component stationary during the placement cycle while the tape itself retracts beneath it. A servo driven actuator controls the retraction distance and speed, matching the timing requirements of the pick and place system.
The retraction feeding method offers mechanical advantages in handling delicate or small form factor components common in consumer electronics. Because the component remains in position while the tape pulls away, there is less mechanical disturbance to the part orientation before nozzle pickup. The feeder body uses a rigid aluminum frame that maintains alignment accuracy across repeated retraction cycles. Guide rails are machined to tight tolerances, ensuring the carrier tape tracks straight during both the forward index and the retraction stroke.
In 3C factories assembling smartphones, wearables, Bluetooth modules, and smart home controllers, the Yinuo Retracting Feeder supports the component variety and placement density these products demand. The retraction stroke parameters can be adjusted for different tape widths and component sizes, providing flexibility across mixed production runs. The compact footprint allows multiple units to operate side by side in high density feeder banks. Its straightforward mechanical design reduces the adjustment and calibration effort needed when switching between product batches.
パラメータ
| アイテム | Parameter | アイテム | Parameter |
| 給餌方法 | まず部品を持ち上げ、その後剥がします。多段階の引き込みに対応しています。 | Operation Panel | 3.5インチTFTカラー画面、480×320ピクセル、静電容量式タッチスクリーン |
| Material Type | テープ・オン・リール | 供給速度 | 無段階速度制御、最大100mm/s |
| 電圧 | DC 24.0V | 待機電力 | < 20W |
| 現在 | 最大5.0A | Operating Temperature | -20°C ～ 65°C |
| 給餌精度 | ±0.2 | 動作湿度 | 20% ～ 90% RH、結露なし |
| 授乳姿勢の調整 | X方向：機械的限界値の調整；; Y方向：ソフトウェアによる調整；; Z方向：機械式調整 |
保管温度 | -40°C～85°C |
| 吸気圧力 | 0.40MPa～0.60MPa | 保管時の湿度 | 10% から 95% へ |
| 通信インターフェース | GPIOのNPN/PNPタイプ | 寿命 | 20,000時間以上（25°C） |
| ハードウェア通信 | GPIO 232、TCP/IP | 寸法 | 実際の製品仕様をご参照ください |
| 駆動方式 | モーター＋空圧 | 重さ | 実際の製品仕様をご参照ください |
https://www.youtube.com/@allaismt
For more information about the Yinuo Retracting Feeder, 、メールをお送りください
お問い合わせには速やかに対応し、弊社製品およびサービスに関する詳しい情報を提供させていただきます。.
