Introduzione
IL Alimentatore automatico per l'inserimento di moduli DIMM introduces a dedicated mechanical handling stage for DIMM Slots before they become part of a motherboard assembly. One important characteristic is its ability to convert an incoming connector supply into a repeatable sequence suitable for automated insertion. The feeder can control the direction, spacing, and release timing of individual DIMM Slots while keeping the connector body referenced against the internal handling structure. This approach is useful when the PCB line operates continuously and the insertion machine requires connectors to arrive according to a predetermined production rhythm rather than at irregular intervals.
Its application becomes especially clear during motherboard assembly. The DIMM Slot is transferred to the release area at the moment required by the insertion cycle. The insertion mechanism receives the connector, while the PCB positioning system establishes the mounting coordinates on the board. The two movements are coordinated so that the connector terminals meet the designated through-hole pattern. Mechanical force is subsequently applied to seat the DIMM Slot against the PCB surface. After insertion, the connector remains mechanically fixed to the board for the following soldering process. The feeder therefore contributes to the timing relationship between component release and PCB indexing, which is an important consideration for automated through-hole assembly.
The Automatic DIMM Insertion Feeder can serve server motherboard production lines, AI computing equipment factories, workstation electronics plants, industrial computer manufacturers, network appliance factories, storage controller manufacturers, and gaming motherboard production facilities. It is also applicable to electronics manufacturers operating several board configurations under one production program. Where different PCB models require different quantities or positions of DIMM Slots, feeder parameters can be coordinated with the corresponding insertion sequence. This makes the machine suitable for production environments where connector handling must follow the actual board recipe instead of relying on a single fixed operating pattern.
Alimentatore automatico per l'inserimento di moduli DIMM
Automated DIMM Slot Handling and Motherboard Insertion Processes with Automatic DIMM Insertion Feeder
IL Alimentatore automatico per l'inserimento di moduli DIMM can be installed directly in the through-hole assembly section of an industrial storage motherboard production line. Typical applications include industrial storage server motherboard lines, NAS motherboard lines, RAID controller board lines, enterprise storage appliance motherboard lines, and embedded storage computer board lines. After SMT assembly is completed, the PCB enters the insertion area with the DIMM Slot mounting holes already prepared. DIMM Slots are loaded into the feeder supply section, where the machine begins separating individual connectors from the incoming component group. Instead of sending multiple connectors toward the insertion head simultaneously, the feeding mechanism releases them one by one according to the programmed assembly sequence.
The operation continues as the selected DIMM Slot moves through the feeder’s internal route. Mechanical guides control the connector body while orientation references establish the correct direction of the slot opening and terminal row. When the storage motherboard reaches the first DIMM Slot coordinate, the feeder advances one connector to the discharge position. The insertion head then engages the presented DIMM Slot, while the PCB fixture holds the board at the programmed insertion coordinate. The head moves downward and pushes the connector terminals through the corresponding PCB holes until the DIMM Slot reaches its seating position. For boards containing several memory slots, the feeder repeats this cycle as the PCB moves between programmed insertion coordinates.
After DIMM Slot insertion, the board leaves the insertion station and enters the selective soldering or wave soldering line, where the connector terminals are electrically joined to the PCB. It can then move through AOI inspection, solder joint inspection, electrical testing, memory interface verification, and functional testing. The same feeding concept can support production lines for industrial storage controllers, network storage appliances, ruggedized storage computers, and enterprise storage systems. In this workflow, the Automatic DIMM Insertion Feeder acts as a dedicated bridge between DIMM Slot supply and motherboard insertion, coordinating component arrival with PCB indexing and downstream soldering requirements.
Specifiche
| Modello | YN-D2109 |
| Dimensioni (L×P×A) | Si prega di fare riferimento al disegno sopra riportato（Unità: mm） |
| Peso | 162,5 kg |
| Operating Voltage | 220 V CA |
| Fornitura d'aria richiesta | 0,5 MPa |
| Potenza massima | 800 W |
| Feed Speed | 2,5 s/pezzo |
| Pannello operativo | Touch screen Wecon |
| Sistema di controllo | Scheda di controllo Leisai |
| Canale | 2 canali |
| Vassoio compatibile | Si prega di fare riferimento al disegno a destra (Su un solo lato è possibile caricare 8 strati di materiale) |
| Material | Compatibile sia con materiali PTH che SMT; supporta l'alimentazione a doppia corsia per materiali diversi (Espulsione automatica del vassoio quando il materiale è esaurito) |
https://www.youtube.com/@allaismt
For more information about the Alimentatore automatico per l'inserimento di moduli DIMM, si prega di inviare una e-mail a
Risponderemo tempestivamente alla tua richiesta e ti forniremo informazioni dettagliate sui nostri prodotti e servizi.
