{"id":25775,"date":"2026-06-29T16:49:51","date_gmt":"2026-06-29T08:49:51","guid":{"rendered":"https:\/\/esmte.com\/?post_type=product&p=25775"},"modified":"2026-06-29T16:49:51","modified_gmt":"2026-06-29T08:49:51","slug":"sheet-retracting-feeder","status":"publish","type":"product","link":"https:\/\/esmte.com\/hu\/products\/sheet-retracting-feeder\/","title":{"rendered":"New Energy Sheet Retracting Feeder Operator Friendly Feeding System"},"content":{"rendered":"

Bevezet\u00e9s<\/h2>\n

Materials that arrive as single-row or multi-row die-cut sheets \u2014 large-format, high-tack, or irregularly shaped \u2014 often fall outside the operating range of conventional feeders. Converting these materials into rolled formats adds cost and time, and for certain adhesive-backed or oversized sheets, the conversion itself may be impractical. The sheet retracting feeder accepts die-cut sheets in their supplied form, cutting out the conversion step and reducing material preparation expense.<\/p>\n

The core feeding action relies on blade retraction rather than forward peeling. The placement nozzle grips the sheet from above while the blade retracts beneath, pulling the carrier tape away from the material. This approach handles large sheets without flex-induced misalignment and manages high-tack adhesives without residue transfer to the blade. The retraction distance is set to exceed the sheet width, ensuring the entire material surface \u2014 including irregular or non-symmetric profiles \u2014 detaches cleanly in a single motion.<\/p>\n

The feeder delivers high throughput through an automated magazine-to-placement sequence: nozzle pickup, blade retraction, material lift, blade return, and carrier indexing. Multi-row magazine configurations support feeding different sheet geometries from one station, enhancing line flexibility without additional hardware. Material compatibility spans paper labels, protective films, foam, double-sided tape, conductive adhesive, copper foil, steel sheets, and stiffener plates. By accepting die-cut sheets directly and processing them in a continuous retraction cycle, the feeder offers a practical alternative for production environments where material diversity, large sheet dimensions, and adhesive complexity define the feeding challenge.<\/p>\n

 <\/p>\n

\"Sheet

Sheet Retracting Feeder<\/p><\/div>\n

 <\/p>\n

Using Sheet Retracting Feeders in New Energy Electronics Board Assembly<\/h2>\n

New energy electronics production \u2014 battery management controllers, inverter power stages, and onboard charger modules \u2014 routinely uses sheet-form materials such as thermal pads, insulation films, copper foil, and conductive adhesive sheets. These materials often arrive as die-cut sheets in single-row or multi-row formats, with large dimensions and high-tack adhesive backing. Converting them into rolled stock adds processing cost, extends lead time, and introduces handling stress that can compromise adhesive performance. For oversized sheets or those with aggressive bonding properties, roll conversion is frequently not viable at all.<\/p>\n

The sheet retracting feeder accepts die-cut sheets directly, removing the conversion step and its associated expense. The nozzle descends and secures the sheet via vacuum, then the peeling blade retracts in the opposite direction, pulling the carrier away while the material stays stationary. The retraction stroke exceeds the sheet width, ensuring complete detachment even for large-format sheets and high-bond adhesives. This inverse separation avoids tearing, curling, and residue transfer common with forward-peel mechanisms. Irregularly shaped sheets with cutouts or asymmetric edges also separate cleanly, since the blade retracts along a linear path independent of the material profile.<\/p>\n

Multi-row magazine configurations allow different sheet types to feed from one station, reducing equipment footprint and simplifying line layout. Programmable stroke, speed, and pitch settings enable quick adjustment between batches without mechanical changes. Interchangeable blade widths support material size changes at the feeder level rather than requiring dedicated feeder units for each format. Stacked magazine loading supports extended unattended operation, keeping throughput steady across shift changes. These capabilities suit the high-mix production typical of new energy manufacturing, where battery packs, inverters, and charging modules shift material requirements from batch to batch.<\/p>\n

 <\/p>\n

 <\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

 <\/p>\n

Parameters<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
T\u00e9tel<\/strong><\/td>\nParameter<\/strong><\/td>\nT\u00e9tel<\/strong><\/td>\nParameter<\/strong><\/td>\n<\/tr>\n
Feeding Method<\/td>\nPeel onto anti-adhesion platform, then pick<\/td>\nOperation Panel<\/td>\n3.5″ TFT touchscreen, 480\u00d7320 pixels, capacitive<\/td>\n<\/tr>\n
Component Type<\/td>\nStrip components
\n(blank area required at both ends)<\/td>\n		Feeding Speed<\/td>\nStepless speed control, max 100mm\/s<\/td>\n<\/tr>\n
Voltage<\/td>\nDC 24.0V<\/td>\nPower Consumption<\/td>\n<20W<\/td>\n<\/tr>\n
Current<\/td>\n5.0A MAX<\/td>\nOperating Temperature<\/td>\n-20~65\u00b0C<\/td>\n<\/tr>\n
Feeding Accuracy<\/td>\n\u00b10.5<\/td>\nOperating Humidity<\/td>\n20~90%RH, non-condensing<\/td>\n<\/tr>\n
Feed Position Adjustment<\/td>\nX: mechanical limit adjustment;
\nY: software adjustment;
\nZ: mechanical adjustment<\/td>\n		Storage Temperature<\/td>\n-40~85\u00b0C<\/td>\n<\/tr>\n
Air Supply Spec<\/td>\n0.40~0.60 MPa<\/td>\nStorage Humidity<\/td>\n10~95%<\/td>\n<\/tr>\n
Communication Interface<\/td>\nGPIO NPN\/PNP type<\/td>\n\u00c9lettartam<\/td>\n\u226520K hrs. (25\u00b0C)<\/td>\n<\/tr>\n
Hardware Communication<\/td>\nGPIO, RS232, TCP\/IP<\/td>\nM\u00e9retek<\/td>\nPer product specification<\/td>\n<\/tr>\n
Drive Method<\/td>\nElectric + Pneumatic<\/td>\nS\u00faly<\/td>\nPer product specification<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

\"\"<\/p>\n

 <\/p>\n

https:\/\/www.youtube.com\/@allaismt<\/u><\/a><\/p>\n

For more information about the Sheet Retracting Feeder<\/strong>, k\u00e9rj\u00fck, k\u00fcldj\u00f6n egy e-mailt a k\u00f6vetkez\u0151 c\u00edmre:<\/p>\n

info@allaismt.com<\/u><\/a><\/p>\n

Megkeres\u00e9s\u00e9re halad\u00e9ktalanul v\u00e1laszolunk, \u00e9s r\u00e9szletes t\u00e1j\u00e9koztat\u00e1st ny\u00fajtunk term\u00e9keinkr\u0151l \u00e9s szolg\u00e1ltat\u00e1sainkr\u00f3l.<\/p>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

Le\u00edr\u00e1s\uff1aA Sheet Retracting Feeder<\/strong> processes die-cut sheets directly from the magazine \u2014 no roll conversion required. A vacuum nozzle grips the sheet while the peeling blade retracts, pulling the carrier backward over a distance greater than the sheet width. This full-travel retraction detaches large-format, high-tack, and irregularly shaped materials cleanly, avoiding the tearing and residue issues of forward-peel systems. Direct sheet feeding cuts material preparation costs and eliminates the downtime of format conversion. Multi-row configurations feed different sheet types from one station. Interchangeable blades, programmable stroke and speed, and stacked magazine loading support high-mix, high-throughput production<\/p>\n

Minim\u00e1lis rendel\u00e9si mennyis\u00e9g: 1 db<\/p>\n

\u00c1tfut\u00e1si id\u0151: 15 nap<\/p>","protected":false},"featured_media":25782,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"etheme_brands":[],"product_brand":[],"product_cat":[161,216],"product_tag":[],"class_list":["post-25775","product","type-product","status-publish","has-post-thumbnail","product_cat-smt-custom-feeder","product_cat-sheet-feeder","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product\/25775","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/comments?post=25775"}],"version-history":[{"count":3,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product\/25775\/revisions"}],"predecessor-version":[{"id":25785,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product\/25775\/revisions\/25785"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/media\/25782"}],"wp:attachment":[{"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/media?parent=25775"}],"wp:term":[{"taxonomy":"brand","embeddable":true,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/etheme_brands?post=25775"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product_brand?post=25775"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product_cat?post=25775"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/esmte.com\/hu\/wp-json\/wp\/v2\/product_tag?post=25775"}],"curies":[{"name":"munkaf\u00fczet","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}