{"id":26524,"date":"2026-08-06T17:48:55","date_gmt":"2026-08-06T09:48:55","guid":{"rendered":"https:\/\/esmte.com\/?post_type=product&p=26524"},"modified":"2026-08-06T17:48:55","modified_gmt":"2026-08-06T09:48:55","slug":"automatic-jumper-feeder","status":"publish","type":"product","link":"https:\/\/esmte.com\/es\/products\/automatic-jumper-feeder\/","title":{"rendered":"High-speed Automatic Jumper Feeder Routes New Energy Electronics Factory Wire"},"content":{"rendered":"

Introducci\u00f3n<\/h2>\n

El Alimentador autom\u00e1tico de puentes<\/strong> is engineered around a motorized spool-drive system that pays out fine-gauge jumper wire from a reel directly into a precision feeding channel, eliminating the need for carrier tape entirely. A torque-controlled unwind motor maintains constant back-tension on the wire spool, preventing loose loops and snarls that plague passive spool holders while ensuring the wire enters the feed track with uniform linear tension from the first meter to the last. The wire travels through a dual-roller straightening assembly that counteracts the natural coil memory imparted by the reel, presenting a straightened segment at the pickup window so the placement nozzle can grip a flat, untwisted length rather than a curved arc.<\/p>\n

At the delivery stage, a servo-driven cutter module shears the wire to a programmable length with clean, burr-free ends, then advances the cut segment into a vacuum-assisted pickup pocket. The cutter blade geometry is optimized for soft-copper and tinned-copper jumper alloys, producing a perpendicular cut that prevents stubbing or partial-severing issues that can jam downstream mechanisms. A wire-breakage sensor positioned between the spool and the straightener halts the feed sequence instantly if the reel runs out or the wire snaps, sending a digital fault signal to the placement machine before an empty pickup attempt occurs.<\/p>\n

These design choices translate directly into production reliability. The feeder turns what was traditionally a manual operation \u2014 cutting jumper wires to length and positioning them for pickup \u2014 into a fully automated sequence synchronized to the placement head’s cycle time. Wire length is held within tight tolerance from piece to piece, eliminating the variability of hand-cut jumpers. And because the system handles the full diameter range of standard jumper gauges without mechanical tooling changes, a single feeder unit covers the majority of wire-jumper applications on a typical SMT line.<\/p>\n

 <\/p>\n

\"Automatic

Alimentador autom\u00e1tico de puentes<\/p><\/div>\n

 <\/p>\n

Automatic Jumper Feeder for BMS and Inverter Module Assembly in New Energy Manufacturing<\/h2>\n

El Alimentador autom\u00e1tico de puentes<\/strong> processes reel-fed jumper wire through an integrated unwind-straighten-cut-place sequence where every stage is actively controlled rather than passively guided. A programmable spool drive with torque feedback monitors and adjusts unwind force continuously, compensating for the decreasing spool diameter as wire is consumed and the corresponding change in rotational inertia. The wire feeds into a linear track equipped with tension-sensing pinch rollers that detect subtle variations in conductor surface friction and adjust grip pressure in response, preventing the slip that produces length errors on the finished jumper while avoiding the excessive clamping that mars the wire surface.<\/p>\n

The cutting and delivery end of the feeder is purpose-built for the conductor types and end-use requirements specific to new energy electronics. The shear mechanism uses a double-acting blade set driven by a dedicated servo actuator controlling cutting speed and blade-dwell time, producing a perpendicular cut face with minimal burr formation on the copper alloys preferred for power-handling jumpers. After cutting, the jumper transfers into a pickup nest with a precision-machined channel that positions the wire segment for nozzle pickup \u2014 no reliance on gravity alone, no possibility of the jumper rolling out of alignment. An optical confirmation sensor at the nest verifies jumper presence and orientation, preventing pickup attempts on an empty or mispositioned nest.<\/p>\n

The product advantage in new energy manufacturing is straightforward: the feeder replaces manual wire cutting and placement with a repeatable, synchronized process that produces jumpers of identical length and end quality at machine speed. Where BMS boards, inverter modules, and power distribution assemblies demand jumpers capable of carrying significant current, the Automatic Jumper Feeder supplies them from bulk stock without intermediate packaging steps. It eliminates the scrap generated by hand-cut length variations, reduces the handling contamination that degrades solder wetting on thick conductors, and turns what is often the last manual bottleneck on a high-power electronics line into an automated, self-regulating supply station.<\/p>\n

 <\/p>\n

\"\"<\/p>\n

 <\/p>\n

<\/h2>\n

\u00a0 \u00a0 \u00a0 \u00a0 \"\"\u00a0 \u00a0 \u00a0 \u00a0 \"\"<\/h2>\n

<\/h2>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

<\/h2>\n

Presupuesto<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Modelo<\/strong><\/td>\nYN-J2303<\/strong><\/td>\nObservaciones<\/strong><\/td>\n<\/tr>\n
Dimensiones (largo \u00d7 ancho \u00d7 alto)<\/strong><\/td>\n624 \u00d7 78 \u00d7 160 mm<\/strong><\/td>\n<\/td>\n<\/tr>\n
Peso<\/td>\n6,5 kg<\/td>\n<\/td>\n<\/tr>\n
Operating Voltage<\/td>\nDC 24V<\/td>\n<\/td>\n<\/tr>\n
Suministro de aire necesario<\/td>\nNone<\/td>\n<\/td>\n<\/tr>\n
Corriente m\u00e1xima<\/td>\n2,5 A<\/td>\n<\/td>\n<\/tr>\n
Feed Speed<\/td>\n1,5 s\/unidad<\/td>\n<\/td>\n<\/tr>\n
Panel de operaciones<\/td>\nTFT de 0,96\u2033
\nResoluci\u00f3n de la pantalla a color: 80 \u00d7 160 p\u00edxeles<\/td>\n		<\/td>\n<\/tr>\n
Tiempo de cambio<\/td>\n3 min<\/td>\n<\/td>\n<\/tr>\n
Canal<\/td>\nUn solo canal<\/td>\n<\/td>\n<\/tr>\n
Funci\u00f3n de doblado de plomo<\/td>\nFlexi\u00f3n<\/td>\n<\/td>\n<\/tr>\n
Funci\u00f3n previa a la elevaci\u00f3n<\/td>\nServicio de recogida previa disponible<\/td>\n<\/td>\n<\/tr>\n
Funci\u00f3n de corte<\/td>\nL\u00edmite<\/td>\n<\/td>\n<\/tr>\n
Funci\u00f3n de correcci\u00f3n<\/td>\nCorrecci\u00f3n<\/td>\n<\/td>\n<\/tr>\n
Di\u00e1metro del alambre del material<\/td>\n0,4\u20131 mm<\/td>\nNo se puede utilizar una matriz de conformado de 0,6 mm para conformar un alambre de 0,4 mm;
\nSolo se puede utilizar una matriz de 0,6 mm para un alambre de 0,6 mm.<\/td>\n<\/tr>\n
Distancia entre carriles<\/td>\n5\u201326 mm
\n(La matriz de conformado depende del di\u00e1metro del alambre)
\nMolde en forma de cruz: 3 tama\u00f1os en un solo juego (grande\/mediano\/peque\u00f1o)<\/td>\n		No se puede utilizar la matriz de conformado de 16 mm para un paso de v\u00eda de 16 mm;
\nSe debe utilizar una matriz de 16 mm de longitud<\/td>\n<\/tr>\n
Longitud del plomo de conformado<\/td>\n2,0~5,5 mm<\/td>\nDentro de este rango, solo es posible obtener diferentes longitudes
\nutilizando diferentes matrices de conformado de los tama\u00f1os correspondientes<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

https:\/\/www.youtube.com\/@allaismt<\/u><\/a><\/p>\n

For more information about the Alimentador autom\u00e1tico de puentes<\/strong>, por favor env\u00ede un correo electr\u00f3nico a<\/p>\n

info@allaismt.com<\/u><\/a><\/p>\n

Responderemos a su consulta a la brevedad y le proporcionaremos informaci\u00f3n detallada sobre nuestros productos y servicios.<\/p>\n

 <\/p>","protected":false},"excerpt":{"rendered":"

Descripci\u00f3n: El Alimentador autom\u00e1tico de puentes<\/strong> uses a self-regulating spool-to-pickup architecture. A programmable unwind motor with closed-loop torque feedback manages wire tension, while tension-sensing pinch rollers detect friction changes and adjust grip pressure to prevent slip without marring the conductor. The wire feeds into a servo shear module where blade speed and dwell time are controlled for burr-free cutting on copper alloys. Each cut jumper drops into a machined pickup channel holding the segment in precise alignment, confirmed by an optical sensor at the nest. The feeder handles the full jumper wire gauge range without tooling changes, producing jumpers of identical length and end quality from reel start to reel end.<\/p>\n

Cantidad m\u00ednima de pedido: 1 unidad<\/p>\n

Plazo de entrega: 15 d\u00edas<\/p>","protected":false},"featured_media":26529,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"etheme_brands":[],"product_brand":[],"product_cat":[161,226],"product_tag":[],"class_list":["post-26524","product","type-product","status-publish","has-post-thumbnail","product_cat-smt-custom-feeder","product_cat-jumper-feeder","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product\/26524","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/comments?post=26524"}],"version-history":[{"count":3,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product\/26524\/revisions"}],"predecessor-version":[{"id":26531,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product\/26524\/revisions\/26531"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/media\/26529"}],"wp:attachment":[{"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/media?parent=26524"}],"wp:term":[{"taxonomy":"brand","embeddable":true,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/etheme_brands?post=26524"},{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product_brand?post=26524"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product_cat?post=26524"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/esmte.com\/es\/wp-json\/wp\/v2\/product_tag?post=26524"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}