Einführung
Der Axial Insertion Feeder is a purpose-built feeding module designed to operate in conjunction with pick and place machines, managing axial-lead components throughout the PCB assembly process. It automates the delivery of resistors, capacitors, and diodes, guiding each part from the supply track to the placement position in a consistent, ready-to-insert state, so placement accuracy holds steady from the first board of a production run through to the last.
Compatibility defines much of its character. The feeder works within both SMT and THT processes, allowing axial components to be inserted with the same rhythm and positional discipline as the surface-mount stations operating alongside them. On mixed-technology boards this removes the usual divide between the two assembly styles: through-hole parts follow a continuous automated path rather than a manual one, and high-speed insertion proceeds without operator intervention or mid-run adjustment of the feeding mechanism itself.
Precision sits at the center of the design. Components are guided, oriented, and released under controlled conditions, so each resistor, capacitor, or diode arrives at the board exactly as the placement program intends. By replacing hand-loading with a stable, repeatable automated motion, the feeder raises the efficiency of PCB manufacturing as a whole and brings through-hole insertion fully into step with the standards of modern assembly line automation.
Axial Insertion Feeder
The Axial Insertion Feeder: Keeping Through-Hole Assembly Automated in Wearable Manufacturing
Wearable electronics compress an entire system — sensing, processing, power, and communication — onto boards of very limited area, and the Axial Insertion Feeder is what keeps the through-hole side of that miniaturized assembly automated. It feeds resistors, capacitors, and diodes into the pick and place machine in correct orientation, so the leaded components that remain in wearable designs are placed with the same discipline as the surface-mount devices surrounding them on the same compact circuit.
Because the feeder operates within both SMT and THT processes, it suits the mixed-technology boards that wearable products depend on. A smartwatch main board or an earbud charging board may carry dense SMD circuitry alongside a handful of axial parts in its power stage; the feeder lets a single line cover both without splitting production across separate stations, retraining operators between product variants, or slowing the placement cycle to accommodate the leaded stage of the build.
The feeding, alignment, and hand-off motions repeat identically for every board, which stabilizes placement quality across long production runs of compact assemblies. Miniaturization also means the axial parts in a wearable board often sit close to sensitive surface-mount circuitry, so the calm, controlled release of each component protects the neighborhood around every insertion point. For a smart wearable factory, the through-hole step becomes a dependable automated stage, fully in step with the high-speed pick and place operations that surround it, rather than a manual island that holds the rest of the line back.
Spezifikationen
| Modell | YN-A2101 | YN-A2208 |
| Abmessungen (Length * Width * Height Unit: mm) |
570×90×140mm | 570*127*150mm |
| Gewicht | 8.5KG | 14KG |
| Operating Voltage | DC 24V | |
| Air Supply Required | None | |
| Maximum Current | 3A | |
| Feeding Speed | 1.5–2 s/Pcs | 2.5–3 s/Pcs |
| Drive Mode | Purely Electric | |
| Bedienfeld | 0.96″ TFT Color ScreenResolution: 80×160 pixels | |
| Material Lifting Error | ±0.4mm | |
| Applicable Tape Width | 60–66mm | 63-90 mm |
https://www.youtube.com/@allaismt
For more information about the Axial Insertion Feeder, Bitte senden Sie eine E-Mail an
Wir werden Ihre Anfrage umgehend beantworten und Ihnen detaillierte Informationen über unsere Produkte und Dienstleistungen zukommen lassen.
